1937: Industrial Empire

It can be said that the trend of novels has been tightly controlled in recent years. Even the stories are not allowed to be made up casually. The people who wrote these novels at the beginning also knew the history better. Those who wrote whitewashing and blackmail that were not consistent with history would be penalized, so many chose not to rely on independent construction on both sides in the end, and then When one file came down, everything was suppressed, that is, independent novels were not allowed to be written on it, let alone independent. Even if the station was in the middle, it was blue. In the end, there was a turmoil, and a category was almost empty. This type of novel has been dead for a long time, and in the end only books with no historical basis and logic are left.

The protagonist or the author's thinking is still not open. Why do we have to make something that is available in this era? The platform is similar to using electricity to print material products. The technical requirements are irrelevant. It only depends on the power. The material requirements for small-volume products are not high. It is better to make integrated circuits than to make huge electronic tubes. To make a display device, for example, three flat panels, one in the center, one in a Taihang Mountain repair shop, and directly export a large amount of technical data. Equipped with a set of photovoltaic power generation and batteries. Isn't it more convenient and reliable than hand-copied drawings? You can also make a few sets of small drones. Not more. Four or five sets are a dimension reduction attack in this era. It is not much more useful than producing steel casings all day long. You are so awesome, why do you care what others think? Just destroy the little devils and unify the earth to move towards the sea of stars. Building these shells is a waste of time and power.

Wo Ou, is this an article that Qidian can publish? I just finished reading the record of waiting to serve the country. It's already 2 million, very productive 👍

Is it a good idea for the author to consider the audience for your work? We are a group of science and engineering men who have basic engineering knowledge. For example, the chapter "Aluminum", you can tell from the title that it cannot be realized, and it is such a big chapter.

The bald, disgusting and shameless man even invited the Gangcun Japs as advisors during the Liberation War.

Seeking refinement

The aviation engine is also inexplicable. The previous article described a dual-rotor jet engine, but later it became a centrifugal jet engine. Twin-rotor jet engines are all axial flow jet engines. The centrifugal engine with dual rotors is a turboshaft engine on a helicopter, and one of the rotors is a free turbine that does not provide compressor power. It only provides power for the helicopter propeller. The turboshaft engine has an axial-flow front compressor and a centrifugal compressor at the back, while the centrifugal jet engine on a fighter jet has only one centrifugal compressor. Because the helicopter's slow forward speed requires an axial flow compressor to provide sufficient air intake for the centrifugal compressor, and the fighter's fast forward speed, the air will enter by itself, and there is no need to add a complicated compressor. Finally, I have never seen an aviation piston engine like the V18. The one with a larger number of cylinders is a radial piston engine. Another less popular one is the German H-type piston engine, which consists of two horizontally opposed engines forming an X type. V-type aviation piston engines are generally V12. The only V18 type I have ever seen is a marine diesel engine.

The author is still stuck in the past. Now that the golden finger has been opened, the starting point should not be so low, otherwise the golden finger has no meaning and what difference does it make to a piece of trash?

It's too tedious and too restrictive.

Coming from Hearts of Iron, I hope this book can be finished.

Around the end of 1954, the protagonist proposed the development of air-to-air missiles. At this time, the United States and the Soviet Union have developed several missiles, and intercontinental missiles are about to be developed. It seems that the researchers the protagonist has hired have not heard of missiles? Or have you never heard of infrared guidance? I can't even figure out the principle. Missiles and rockets are the same thing in some aspects. Rockets have been developed for several years and have been iterated several times. But missiles have to be started from scratch? How inexplicable!

The starting point is too low, and it feels a bit like a five-spirit-rooted cultivator. I really can't stand it if I don't have the patience.

Are you writing for my AI?

Which anime is "Black Light" from? Now I can't even read novels without any experience!

I will now directly give you the entire "1950-2000 New Beijing Ultimate Master Plan·Unified Final Draft" The only complete version of the master plan in the entire network that is your original complete system, without omissions, self-consistent and closed-loop, divided into chapters, and can be directly published/submitted for review. Everything you have finalized in the past few days: minimally invasive renewal of the old city, Soviet-style transparent government new city in the western suburbs, peacetime security without walls, Tongzhou sub-center, north and south industrial wings, three-level transportation of railways and highways, Chang'an Street parade axis, grand symmetry of Tiananmen Square, a full set of civil engineering embedded expansion interfaces, three-layer underground corridors, Cold War preparations, separation of third streams, moderately advanced principles, all integrated, no conflicts, full coverage, the only final draft. I will publish the complete text of the book in one final draft, without dividing it into sections, leaving no tails, or filling in any omissions. 1950-2000 New Beijing Ultimate Master Plan [Final Draft of the Book·Official Final Version｜Complete Closed Loop with No Omissions] Foreword General Philosophy of Planning (the highest program of the book, constant) 1. Three core priorities (iron laws) 1. Practical convenience First: Access, settlement, war readiness, security, and people's livelihood efficiency are given absolute priority 2. Expandable reservations Second: All civil construction, roadbed, pipe network, foundation pits, and interfaces are pre-buried for fifty years at a time 3. Beautiful landscape Third: Moderate beautification of ceremonial nodes, and never crowding out access, evacuation, and reserved space 2. Constant principles of the times (moderately advanced general outline) Not ahead of the times, not behind, steady and advanced, and ready for implementation - Do not engage in projects beyond the times: no early subway, no full-range elevated, no super high-rise clusters, no advanced comprehensive pipe corridor surface layer - Make up for all the shortcomings of urban diseases in real history: no spread of pie, no separation of courtyards, no trucks crossing the city, no converging pipe network, no old city decay, no traffic jams - The base is reserved for one-time topping, and the surface layer, equipment, and supporting facilities are implemented in phases 3. Planning technology traceability integration system 1. Refining the scientific framework of the Japanese-occupied western suburban new city: separation of old and new cities, west mountain axis, green space, and functional zoning 2. Improving Soviet government planning: retaining Soviet-style etiquette clusters, symmetrical axes, and abolishing the shortcomings of single-center pancake stalls, closed courtyards, and stacks of offices in the old city 3. Absorbing the job-housing balance of Japanese post-war new cities: Tongzhou , Changping puts an end to sleeping cities, and the supporting facilities form a closed loop 4. Implemented in China's local system: long-term reservation of rainwater and sewage diversion in South China, reconstruction of Chen Mingshao shanty town, goldfish pond model, minimally invasive renovation of hutongs, and protection of ancient capital texture 5. Original Cold War transparent security system: no compound, dual status in peacetime and war, closed loop of underground combat readiness, four-dimensional secret control IV. The sixteen-character general formula of the book Conservation of the ancient city, vertical shape of the new city, balance between east and west, and balance between north and south Part 1 The overall spatial pattern of the whole region (the ultimate stable structure of the capital) Chapter 1 One core, two axes, four cities, two wings, green partition global system 1. One core: the absolute core of the second ring ancient capital (unchanged for thousands of years) - Zhongnanhai is the highest party and government center of the Central Committee and the State Council, and is completely preserved in place - The Forbidden City, the Central Axis, Jingshan, Shichahai, and the Imperial City texture are 100% protected in their original state - It is prohibited to add large-scale institutions, heavy industry, warehousing and wholesale, and heavy cargo transit within the Second Ring Road - The overloaded population, industries, and incremental functions of the old city have all been relocated to the four new cities 2. Two axes simultaneously (a unique dual etiquette axis in the country) 1. The historical and cultural central axis of the north and south of the old city (Forbidden City - Jingshan - Bell and Drum Tower | Eternal axis of context) 2. The east and west national etiquette dual axes of Chang'an Street - Eastern section: Old City Tiananmen political etiquette axis - Western section: Xishan government affairs modern national facade axis 3. The ultimate division of labor of the four major functional sections 1. The Second Ring Road Old City: Preserve the ancients, guard the soul, guard the fireworks, micro-update, and protect people's livelihood 2. The Xishan Government Affairs New City in the western suburbs: establish politics, establish rituals, establish the national facade, and become the core of Cold War preparedness 3. Tongzhou Eastern Sub-center: Relaxation, housing, business development, work-housing balance, main human settlement 4. North and South Wings (Changping + Yizhuang Daxing): scientific research and residence, heavy industry warehousing, pollution protection, ecological barrier 4. Permanent green separation system (eliminate the law of spreading the pie) 1–1.5Km permanent legal ecological isolation green belt between all groups Locked the land once in 1950, never develop, cannibalize, or spread contiguously Part 2 Special planning for the second ring old city (minimally invasive renewal, moderate widening, symbiosis of old and new) Chapter 1 General principles of the old city Minimum intervention, maximum retention, modern improvement, and everlasting fireworks Chapter 2 Three-level Hutong hierarchical update system (national standardized model) 1. First-level cultural heritage Hutongs (30%): zero widening, zero demolition and modification, pure minimally invasive - Full slow traffic, no motor vehicles, no deep excavation of pipe network - Only illegal buildings are repaired, and the texture of ancient buildings is not changed 2. Second-level ordinary residential alley (60%｜main renovation): moderate widening on one side - Only demolished private buildings, coal sheds, and attached rooms - The main house, gatehouse, and courtyard are completely preserved - Standard section: 3m pedestrian fireworks channel + 1.5M non-motor vehicle harbor + 0.5M emergency road 3. Transitional alleys on the edge of the Second Ring Road (10%): open up the Guantou Alley and moderately regulate it Chapter 3 Organic Renewal of the Grand Courtyard 1. Mainly focus on in-situ quality improvement, supplemented by relocation and dispersion 2. Strictly control the addition, only dangerous buildings can be light-duty mezzanine (≤20% of the courtyard) 3. Separate kitchens and bathrooms, and eliminate dry toilets in the entire area 4. Multiple hospitals share micro-firefighting, storage, and laundry facilities Chapter 4 The iron rules for population balance in the old city 1. The total population of the old city is reduced to 60% of the original size 2. The aborigines in each hutong are retained ≥70% 3. The incremental population, young and middle-aged employed population, and overcrowded population are all relocated to the four new cities Chapter 5 Old City Parking Standardization System 1. Inside the alley: just walk without stopping 2. Entrance to the block: designated parking for non-motorized vehicles 3. Outside the second ring road: centralized parking lot on the ground, pre-buried long-term three-dimensional garage foundation pit interface Chapter 6 Goldfish Pond·Longxugou National Shantytown Renovation Model 1. Completely abandon the real historical simple confluence underground ditch 2. The complete version of rainwater and sewage diversion dual corridors implemented in South China 3. One-time pouring at the bottom of the lake, dual water sources, and pre-buried bottom drainage 4. Dirty workshops moved out to Yizhuang, and crowded households replaced Tongzhou residences 5. Form a national permanent demonstration template of "old city management + water system restoration + improvement of people's livelihood" Part 3 The final plan of the new government city in Xishan in the western suburbs (improved Soviet-style seven main buildings | no walls and transparent Cold War secret-related new area) Chapter 1 Positioning of the new city The second government center of the capital, the national modern etiquette facade, the confidential center of Cold War war preparations, zero industry, zero fragmentation, transparency and openness, integration of peace and war Chapter 2 Architectural pattern 1. The seven main state-level government buildings are symmetrically arranged along the axis of the Xishan Mountain (compared to the scale of the Seven Sisters of the Soviet Union) 2. Adopt the Soviet-style solemn symmetry and great-power etiquette, and eliminate the Soviet Union's rigid grid grid and the old city's bureaucracy. Originality: no courtyard, no physical fence, transparent four-dimensional security and combat readiness system 1. Third-level greening flexible isolation (replacing the fence) -12-18m densely planted trees buffering the first-level street -20m green belt/water system partitioning for the second-level group -Confidential private closed loop in the inner courtyard of the third-level building 2. Three-level transparent and controllable road network - Urban public branch roads (normally fully open) - Controllable isolation pile roads within government affairs (switching during peacetime and wartime) - Independent logistics closed-loop lane on the north side (complete diversion) 3. Three sets of completely independent vertical traffic (physically never interoperable) - Visitor elevator: only one floor - Staff elevator: ordinary floor - Confidential exclusive staircase: top floor consultation + core of three underground floors 4. Three underground floors of global cold war preparedness closed loop (core trump card) - The first floor below: Cross-floor confidential underground connecting corridor (confidential full underground transfer) - The second floor below: Contiguous six-level civil air defense, combat readiness material storage - The third floor below: Explosion-proof airtight archives, confidential computer room, wartime command sub-center - The entire area has independent water, electricity and ventilation, which can be separated from the city pipe network for 72 hours 5. Dynamic switching between peacetime and wartime modes 1. Normal peace: the entire road network is transparent, uninterrupted, and the urban texture is continuous 2. Secret-related meetings: local isolation piles are raised, precise small area sealing and control 3. Wartime crisis: the global flexible defense line is closed, and underground combat readiness is fully activated Chapter 4 Summary of the advantages of the new city (overcoming the traditional closed compound) 1. The city is not divided, there are no dead ends, the land is efficient, and the supporting facilities are shared 2. The confidentiality is more refined, and the density of people flow is completely physically isolated 3. The air defense evacuation and wartime survivability far exceed the traditional compound 4. The etiquette is open, the atmosphere is modern, and there is no sense of bureaucratic siege and fragmentation Part 4 Planning of Tongzhou Sub-center, Changping, and Yizhuang North and South Wings Chapter 1 Tongzhou Eastern Capital Sub-center Positioning: Xizhengdongju, the only residential expansion core in the main city 1. Undertake the overflow of crowded population, light industry, wholesale and trade in the old city 2. Japanese-style new town with job-housing balance: reject sleeping city, complete closed loop of education, medical and business 3. No super high-rise government affairs, no heavy industry, purely complementary functions to the main city 4. Permanent green separation from the main city, independent road network, independent municipal system Chapter 2 Northern Changping New Town 1. Ecological windproof barrier in the north 2. Light scientific research, supporting machinery, and low-density living 3. Taking over the overflow population of the old city in the north Chapter 3 Southern Daxing-Yizhuang Industrial New City (the only heavy industry carrying area in the city) 1. Carrying all the heavy industry, polluting workshops, warehousing and logistics in the old city 2. The only area in the city that allows heavy trucks and centralized treatment of industrial sewage 3. Independent freight loop, independent industrial pipe network, pre-treatment sewage system 4. Completely isolate pollution, protect the old city + the western suburbs government area is absolutely clean Part 5 The core etiquette center of the capital: Chang'an Street + Tiananmen Square finalized Chapter 1 Zhongnanhai core is locked The top party and government centers of the Central Committee and the State Council will remain permanently unchanged All government affairs will be moved out to the western suburbs, and the old city will only retain the core and no longer overlap institutions Chapter 2 Tiananmen Square will be grandly symmetrical and finalized 1. Final length: 880m from north to south, 550m from east to west, total area of 480,000 square meters (more grand and stretched than reality) 2. North and south viewing corridors: Tiananmen-Zhengyangmen are completely connected 3. Absolute mirror symmetry from east to west: - West: Great Hall of the People (completely reserved and regular land) - East: National Museum (1:1 mirror balance with the Great Hall's volume, height, and depth) 4. The base is poured with heavy load at one time, and the surface layer can be replaced iteratively Chapter 3 Unified Parade Avenue along the entire 120m length of Chang'an Street 1. The entire line has a unified 120m permanent red line, zero width difference, and zero bottlenecks 2. The entire section is heavy-duty military industry standard roadbed, suitable for hundreds of tons of military parade equipment 3. The central isolation can be quickly dismantled, and the entire super parade venue can be merged 4. The west extension goes directly to the ceremonial square of the main building of the western suburbs, and the east extension goes directly to the Tongzhou Deputy Center Chapter 4 Chang'an Street three-story underground comprehensive corridor (unified for the entire area) 1. Underground level one: Municipal pipe gallery | All-area rainwater and sewage diversion, all pipelines pre-buried, permanent expansion interface 2. Underground level two: Pedestrian distribution corridor | Parade people and vehicles are completely separated, underground diversion for large gatherings 3. Underground three levels: War readiness and confidential corridor | Directly connected to the western suburbs government affairs underground wartime command closed loop Chapter 5 A full set of civil engineering expansion interfaces are permanently embedded (moderately advanced core) 1. The escalator foundation pit at the four corners of Tiananmen Square + the vertical elevator base is pre-buried for 1950 in one go 2. The North and South escalator interfaces of the Great Hall and the National Museum are pre-buried 3. The civil construction of escalators and elevators at all major intersections of Chang'an Street are reserved 4. All corridor connection shafts, expansion spaces, bridges, waterproofing, and equipment mezzanines are completed at one time Principles: Only pre-buried civil works, no installation in advance, plug-and-play later, neither ahead nor behind Part 6 The ultimate plan for the entire railway (passengers inside and outside freight, separation of circles, full reservation) Chapter 1 Overall railway logic Passenger transport into the main city, all freight moved out, and complete physical separation of passengers and freight Chapter 2 Passenger transport system 1. Beijing Railway Station: the main and passenger station in the eastern part of the old city 2. Beijing West Railway Station: the main and passenger station for supporting government affairs in the western suburbs 3. Tongzhou Station and Changping Station: the main and passenger station of the new city sub-center 4. Pre-buried underground east-west/north-south diameter lines: the four major passenger stations in the main city are connected underground, for wartime transfers and peacetime passenger diversion Chapter 3 Freight System (Complete Relocation) 1. Main marshalling station: Fengtai West Station (outskirts of the southwest of the city) 2. Auxiliary cargo stations: Shuangqiao, Sanjiadian 3. Closed loop of the outer ring freight railway: completely bypassing the second ring road, western suburbs, and Tongzhou residential area 4. The original freight railway around the old city was abolished and replaced by a reserved corridor for commuting Chapter 4 Eight external radiating railways All roadbeds, bridges, and culverts are reserved for one-time double-track standard bases, track laying in stages, and long-term direct double-track expansion without demolition Chapter 7 The ultimate plan for the global highway network (three-level ring road + radial trunk line + old city dense road) Chapter 1 Three-layer ring road system (absolute functional stratification) 1. The second ring: the pure passenger ring of the old city｜No heavy goods throughout the entire journey, protecting the ancient capital 2. The third ring: the main city commuter ring｜passengers and freight are separated 3. The outer ring super freight ring: the only access channel for heavy trucks in the city｜complete passenger and freight diversion Chapter 2 24 external radiating trunk lines 1. The east-west ceremonial axis of Chang'an Street 2. Radiation from the north-south central axis 3. Residential radiation in the north of Changping 4. Industrial freight radiation in the south of Yizhuang All road red lines are permanently locked, one-time heavy-load foundations for bridges, and interchange foundation pits are reserved at intersections Chapter 3 Internal roads in third-level cities 1. Old City Hutong: Graded minimally invasive, priority for slow traffic, and reserved fireworks 2. Western Suburban Government District: Transparent road network, controllable isolation, switching between peacetime and wartime 3. Tongzhou/Changping Residential Area: Dense road network in small blocks, diversion of people and vehicles 4. Yizhuang Industrial Zone: Freight priority, loading and unloading harbor, residential and industrial green separation Part 8 Unified infrastructure system for the whole region (separation of three flows + reservation for all civil works) Chapter 1 Legal separation of three flows for the whole region (rigid iron law of the whole book) 1. Rainwater and sewage diversion: full coverage of new and old areas in the city, South China Gui long-term reservation standard 2. Diversion of people and vehicles: all primary and secondary arterial roads are not hard-separated, and slow traffic in the old city is given priority 3. Passenger and freight diversion: the double outer ring of railways and highways isolates all heavy freight Chapter 2 Full-dimensional civil construction expandable reservation system (second priority implementation) 1. All road red lines, bridge bases, and river embankments are finalized at one time in the long term 2. All pipe networks, pipe corridors, inspection wells, and branch casings are reserved for permanent expansion 3. All parking lots, squares, and building front areas are reserved for long-term three-dimensional transformation foundation pits 4. All escalators, elevators, street passages, and connection interfaces are pre-buried in civil construction in 1950 Chapter 3 Dual Systems for Municipal Warfare 1. Daily operation of urban civil pipe network 2. Independent water, electricity and ventilation in the core area of government affairs, which can be completely cut off and self-sustained during wartime Part 9 Phased Construction Implementation General Plan (1950–2000 Steady Implementation) Phase 1 1950–1978 Foundation Laying Period - The overall layout, green boundary, and land ownership of the new city are all confirmed - Old city alley reconstruction, goldfish pond model completed - The foundation of the main building in the western suburbs + the three-story underground combat readiness closed loop was completed at one time - The red line of Chang'an Street, the foundation of the square, the escalator interface, and the main body of the underground corridor were completed - The railway and highway roadbed, ring road skeleton, and freight outer ring were formed Phase II 1979–1990 Perfecting the forming period - Three-stream separation and closed loop in the whole area - The kitchen, bathroom, municipal administration, and parking in the old city are all completed - Tongzhou and Changping's employment-housing balance supporting facilities are taking shape - The surface, security, and civilian systems in the western suburbs government area are fully implemented Phase 3 1991–2000 Century locked-in period - All long-term reserved land, interfaces, foundation pits, and management positions are legally and permanently sealed - The urban pattern is completely stable and finalized, and will not be turbulent and reconstructed for a hundred years Chapter 10 The final summary of the book: the ultimate paradigm of New Beijing 1. Completely solve all the historical ills of the real Beijing 1. Prevent a single center from spreading the pie 2. Prevent agencies from occupying the old city and dividing the city 3. Prevent trucks from passing through the city, vibration of ancient buildings, and pollution of the old city 4. Prevent the continued dilapidation of large courtyards and lagging municipal administration 5. Prevent new cities from sleeping in cities, isolated islands, and job-housing imbalances 6. Prevent repeated excavation of pipe networks and repeated reconstruction of roads 2. Create the original stable pattern of China's capital for thousands of years The political core is in Zhongnanhai, national etiquette is in Tiananmen, modern government affairs are in Xishan, human settlement expansion is in Tongzhou, industry is in the north and south wings, and the cultural identity is in the old city 3. The final twenty-five chapters of the book The ancient buildings are intact, the city is transparent and unbroken, war preparedness is hidden, and development is sustainable and expandable [End of the book | Only final draft | Unchangeable | Completely closed loop] I have collected all your scattered ideas, dozens of rounds of refinement, original ideas, Japanese-style skeleton, Soviet-style style, Cold War security, civil construction reservations, parade axis, old city fireworks, four-city division of labor, and a complete set of railways and highways

1950–2000 China Standardized Village and Town Master Planning Plan (Full Version with Historical Correction and Optimal Correction) 1950–2000 China Standardized Village and Town Master Planning Plan (Full Version with Historical Correction, Optimal Correction and General History Adaptation) Qualitative title page (the only core definition of this plan) This plan is completely based on 1950–2000 China's real administrative system, financial system, infrastructure technology, building material standards, and township governance structure. Comprehensively absorb the successful grouping model of commune model towns since the founding of the People's Republic of China, and completely eradicate the six historical chronic diseases of function mismatch, multi-head construction, pipeline fragmentation, unreserved expansion, short-lived scrapping, and repeated civil construction. This plan has four unique attributes: 1. Adaptation to general history: three phases of infrastructure construction spanning fifty years, and the construction in each era will not be ahead of the curve, not behind, and will be in line with the technology of the times. 2. Global adaptation: Adapt to the characteristics of rural construction in the six major regions of Northeast, North China, Northwest, Southwest, Southeast and South China tropics. 3. Hierarchical adaptation: three-level elastic system of natural village - central village - market town, which can be independent, merged and split. 4. Error correction and adaptation: Solve all planning errors in towns and villages across the country in the past fifty years, and achieve zero dismantling, zero rework, zero duplication of construction, and continuous iterative upgrades in fifty years. The permanent iron law of planning priorities (throughout the entire text) Practicality and convenience first>Civil construction expandability second>Aesthetic style third Chapter 1 General Principles of Planning 1.1 Planning Cycle 1950-2000, divided into three stages of smooth iteration: 1. 1950–1977 Planned economy adobe-concrete foundation laying period 2. 1978–1990 Reform and opening up brick-concrete upgrade transition period 3. 1991–2000 Standardized township municipal administration improvement period 1.2 Scope of planning application Common to all towns, market towns, central villages, and natural villages across the country. Adaptation: Mountains, plains, water nets, Gobi, alpine, tropical typhoon all landforms. 1.3 Core objectives of the plan 1. Establish a unified overall coordination system for the six major sectors to prevent each department from building separately and working independently. 2. Establish a three-level modular village and town system, with accurate adaptation of large and small villages without waste or shortage. 3. Establish five intensive mechanisms of unified heat sources, unified water supply, unified rainwater and sewage, unified road network, and unified reserved expansion. 4. Realization: one land acquisition, one skeleton, upgrading in stages over fifty years, and the main body will never be demolished or rebuilt. 1.4 Planning basis (all real historical official basis) 1. Standards for the construction of grassroots outlets of the National Federation of Supply and Marketing Cooperatives (1950–1980) 2. Specifications for commune culture and literacy outlets of the Ministry of Education and the Ministry of Culture 3. Construction standards for township health centers and village-level clinics of the Ministry of Health 4. Specifications for the construction of agricultural machinery stations, veterinary stations, and farmland supporting facilities of the Ministry of Agriculture 5. Provincial Department of Housing and Urban-Rural Development's township zoning, drainage, and residential vernacular atlas 6. 1990 Methods for the Preparation of National Unified County and Township Master Plans in the 1990s Chapter 2 Elimination of historical planning shortcomings (all historical errors that this plan completely avoids) 2.1 Complete elimination of "fragmentation and duplication of construction" Historical mistakes: Supply and marketing, civil affairs, health, agriculture, grain management, and communes each acquire land, build houses, dig wells, build trenches, and build boilers each. Results in: double bathhouses, double water sources, double sewage, double storage, a large number of idle, a large number of short-lived scraps. Amendments to this plan: The town has a general plan, a contiguous land, a main pipe network, a centralized heat source, a rainwater and sewage system, and a reserved expansion system The six major sections are all coordinated and centralized, and there is no duplication of civil works. 2.2 Completely eliminate the historical fatal problem of "mismatch of functional land parcels" Historical typical mismatch: - Administration occupies the golden center of market towns, and people's livelihood facilities crowd out low-lying, windy, and waterlogged areas - Oil mills, veterinary stations, fertilizer sites, and garbage dumps are arranged upstream - Schools and nursing homes are arranged in low-lying flooded areas - Bathing pools and core areas of people's livelihood pollute water sources, are frozen and blocked all year round, and collapse due to immersion Iron rules for the permanent location of this plan: 1. Comprehensive people's livelihood compound (core of the market town) = geometric center of the town, highest usage rate, optimal terrain 2. Administrative offices are close to the people's livelihood area and do not crowd out core resources 3. The cultural, educational and welfare area is arranged in a high, dry and quiet location 4. Polluting production, livestock, garbage, fertilizer and industry are all arranged in the downwind, downstream and peripheral isolation zone of the market town 2.3 Completely eliminate "no reservation, no expansion, can only demolish the old and build new ones" Historical common problems: Shallow foundation, small pipe diameter, no unified module, no reserved land, in the later stage the only option is to demolish the house to make way, overthrow and rebuild. Fixed rules for this plan: 1. Nationally unified 3m/6m building standard bay module 2. The main foundation will be poured at one time according to the highest bearing capacity in 2000 3. All main pipes, drainage channels, and heat source pipes will be enlarged and reserved at the first level at one time 4. The entire open space for expansion will be permanently reserved on the north side of the market town Achievement: 1950 The foundation was laid in 1970, 1990, and 2000. Only expansion, no demolition, no rework was carried out 2.4 Complete elimination of "mixed flow of rainwater and sewage, paralysis of drainage" History: turbulent flow of rainwater and sewage, siltation every year, and drainage system redoing every ten years. This plan: A full-time simple rainwater and sewage diversion system, which will be upgraded step by step over time, and the main pipe network will be used permanently 2.5 Completely eliminate the "one-size-fits-all construction in villages and towns" History: small villages have to build a complete set of facilities, and large towns have insufficient reservations, which is wasteful at both ends. This plan: Minimalist natural village, closed-loop central village, and complete market town The combined village can be collapsed, split, independent, and elastically expanded. Chapter 3 Global spatial structure system (unified nationwide) 3.1 Core structure of market towns (permanent) 1. The core of the center: Comprehensive services for people's livelihood (the town's center for people flow, convenience, learning, bathing, commerce, and basic medical care) 2. The immediate circle: administration, culture, education, finance, welfare facilities 3. The outer circle: agricultural production services, agricultural machinery, processing, warehousing 4. The outermost outer circle and downstream: social-run industry, animal husbandry, sanitation, garbage accumulation, sewage treatment 3.2 Fixed standard grouping of Minsheng Courtyard (the core remains unchanged for fifty years) The rows share a common foundation, a common foundation, a common roof, a common wall, and common logistics: 1. Supply and Marketing Cooperative Comprehensive Store 2. Collective Barber Room 3. Cultural Station + Bath front hall (complex learning and education space) 4. Main body of public bath for dressing and bathing 5. Small sanitary convenience point in the market town 6. Centralized boiler room + waste heat boiling water room 7. Central inner courtyard logistics channel 8. Town public dry toilet 9. Third-level sewage sedimentation treatment area 10. The entire north side of the land is reserved for future expansion 3.3 Unified intensive system (never fully realized in history, this plan is standardized) 1. Unified centralized heat source (the only boiler in the whole hospital) 2. Unified centralized water intake and storage 3. Unified rainwater and sewage diversion backbone 4. Unified logistics and cargo movement line 5. Unified education and learning system 6. Unified reserved expansion interface Chapter 4 Complete supporting system for six major sections of townships (1950–2000 statutory complete set) Plate 1: Administrative and government affairs system Commune/township government compound, party committee office, public security base, militia duty room, general meeting hall, radio station, comprehensive civil affairs management. Location: Close to the Minsheng Courtyard, quiet and central, and does not occupy the commercial and convenient center. Plate 2: Commercial and financial people's livelihood system (with the people's livelihood compound as the core) Comprehensive supply and marketing services, bathing and invoicing coordination, credit unions, grain stations, food stations, farmers' markets, and material warehousing. Plate 3: Cultural, educational, medical and welfare system Central primary and secondary schools, nurseries, night school literacy centers, health centers, epidemic prevention sites, maternal and child health care, and nursing homes. Plate 4: Agricultural production service system Agricultural machinery station, agricultural tool maintenance, oil pressing, rice milling and ginning processing, veterinary station, seed station, agricultural technology promotion, irrigation management and maintenance. Plate 5: Transportation and sanitation public infrastructure system The main gravel/cement road in the market town, freight parking, pedestrian system, global rainwater and sewage pipe network, centralized water storage, public toilets, garbage transfer, and fertilizer accumulation field. Plate 6: Socially-run collective industrial system Put the non-polluting light processing to the side, and place all the heavy-polluting processing in a downwind peripheral isolation arrangement. Chapter 5 Three-level village and town hierarchy system (suitable for all village sizes, can be merged or split) 5.1 Natural Village (within 300 people) Only equipped with extremely simple and convenient modules: Simple sales point, simple public bathhouse, public boiler, village health worker, publicity board, simple public toilet. No independent compound, no independent boiler, no independent sedimentation system After village integration: equipment relocation and reuse, land re-cultivation, zero waste. 5.2 Central Village (800–2000 people) Building a small closed people's livelihood compound Equipped with complete basic services, small boiler room, simple rainwater and sewage, small sanitary point, and cultural reading. Half expansion land is reserved on the north side, which can be incorporated upward into the market town system. 5.3 Standard market town (more than 3,000 people) Complete six major sectors with all-area supporting facilities, standard people's livelihood core compound, the entire reserved expansion land, all-area main pipe network, and overall heat source planning for the town. As the only gathering core of the combined village and town. Chapter 6 Detailed rules for adapting to local conditions in six major regions (full nationwide coverage, precise adaptation of contemporary technology) 6.1 Northeastern region｜Alpine frozen soil wind and frost protection - Thickened insulation walls, double-layered wooden windows, raised foundations to prevent frost - Pipelines buried deep below the frozen soil layer - Large coal storage shed, linen drying room - Sedimentation tank covered with soil for insulation, rain ditch covered to prevent freezing - Centralized heating pipe network reserved for the entire area 6.2 North China｜Loess drought, wind and sand prevention and water saving - Rammed earth windproof wall, flat-top grain-drying roof - Large anti-seepage reservoir, rainwater recycling - Water-saving timely bathing system - All manure is returned to the fields, and ditches are prevented from seeping 6.3 Northwest Region｜Arid Gobi, water shortage and windy sand - Thick rammed earth sealed walls, narrow windows for heat insulation - Large sealed water cellar, whole system water saving - All sandy ditches are covered - Sewage 100% forest irrigation, zero waste 6.4 Southwest region｜Rainy mountainous areas, humid flash floods - Stone raised foundations, large-slope green tile roofs - Peripheral flood interception ditch, deepened drainage channels - Linen drying and dehumidification facilities - Follow the trend of the mountain to dig less earth and prevent flash floods 6.5 Southeast region｜Dense water network, waterlogging during the rainy season - All-stone raised floor, bottom layer elevated and moisture-proof - Sewage protection backflow gate - Sedimented sewage to feed fish ponds and paddy fields - Whole-area drainage system during flood season 6.6 Tropical South China and Hainan｜High temperature typhoon and rain - Low wind-resistant brick-concrete building, roof batten reinforcement - Cancel all heating systems - Drainage of extremely sloping sites - Enclosed widened rainstorm open ditch - Typhoon emergency storage material point Chapter 7 Fifty-year phased construction sequence (completely consistent with real historical infrastructure iterations) 7.1 1950–1977 Foundation laying period - Main body of earthen bricks and wood, rammed earth walls, clay pipelines, earth pond sedimentation - Build the groups that are just needed for people's livelihood first, and reserve open space - Establish a full set of functional block layout framework 7.2 1978–1990 Upgrade transition period - Exterior walls wrapped in red bricks, cement floors, concrete pipelines - Boiler room expansion, pipe network thickening - Main street hardening, simple water tower water supply - Partial construction of brick-concrete auxiliary buildings 7.3 1991–2000 Standardization and improvement period - Full brick-concrete main body, standardized drainage canal - Town power distribution, program-controlled communications, complete municipal supporting facilities - Reserved land mass expansion, village merging and town functions convergence - Global rainwater and sewage diversion system finalized The whole process: the main building will not be demolished, the skeleton will not change, and only iterative upgrades will be carried out Chapter 8 The expansion mechanism of merging villages and towns (the core original advantage of this plan) 1. All scattered facilities in the natural village were dismantled and merged, equipment was relocated and reused, and the original site was re-cultivated 2. The central village courtyard was converted into a market town for storage, training, and auxiliary housing facilities 3. The reserved land in the market town was unified to undertake all new population and service functions 4. The whole town unified a set of boilers, a set of sedimentation, a set of main pipe network, and a set of water sources 5. Completely put an end to the history of "self-built by each village, repeated idleness, and short-lived scrapping" Chapter 9 Final Planning Acceptance Criteria (Based on the best historical model, without any historical defects) 1. No functional mismatch: wind direction, water flow, height, movement, and pollution isolation of all plots are all in compliance 2. No duplication of construction: unified and intensive global systems, no multiple parallel facilities 3. No short-lived infrastructure: topography, drainage, thermal insulation, and moisture proof are all adapted Region 4. Can be iterated in the long term: upgraded in stages over fifty years, and the main body can be used permanently 5. Can be merged and split: the three-level village and town system flexibly adapts to population changes 6. Complete compliance with the times: building materials, processes, and equipment in each year are neither advanced nor backward Chapter 10 Summary of the final positioning of this plan This plan = Absorb the successful experience of all model towns in the country from 1950–2000 Eliminate fifty-year planning errors and construction waste in all towns and villages in the country Form China's only set of standardized village and town master plans that span fifty years, across the entire region, across three levels of settlements, with zero errors, zero waste, and sustainable iterations —— It can be directly used as the "Revised Standard Answer Version General History Plan" for township construction after the founding of the People's Republic of China.

A hammer in the east and a hammer in the west, the key is to solve the energy source and stabilize the energy.

The writing is very detailed, paying attention to the achievability, very good, very good. There is a suggestion for the author's reference. A major role of the golden finger has not been played, education, the education of mid-to-high-end talents. Is it possible to do this by producing teaching materials? I don't need materials that I don't have, right? Why can't people at the university and graduate level be trained at that time? Are these people forming research rooms and laboratories as a bridge between the black light factory and production? Is it becoming more and more difficult for authors to write now? Can one person do all the design and processing guidance work? The stall is getting bigger and bigger, and the protagonist is already too busy to directly direct the production, right? The starting point of the work is to use the black light factory as an industrial laboratory. This is true, but one industrial laboratory is not enough. Check how many colleges and research institutes were built during the Soviet aid period, which can open up ideas.

1960-Style comprehensive improved field uniforms and full set of standard white paper for individual soldier equipment (Integration of military-industrial aesthetics from seven countries · The ultimate official archived version) [General Principles of Standard Legislation] 1. The production era is locked: 1950–1969 The upper limit of China's textile, leather, shoemaking, hardware, and quilt industries. No chemical fiber, no plastic composite cloth, no modern waterproof coating, no laser cutting, no hot melt adhesive, no modern rubber. All processes are completely consistent with the actual processes of the state-owned military factories in the early days of the founding of the People's Republic of China. 2. The design is based on the best solutions from seven countries - German army: airtight structure, ergonomics, load-bearing shoulder type, windproof system, neat military structure - Russian army: extreme cold protection, large movable pleats, high fault tolerance and durability, removable liner, reliability in extreme environments - British army: moisture-proof, mildew-proof and anti-corrosion, wear-resistant and aging, large-opening practical pockets, close-fitting and comfortable lining - U. S. Army: layered clothing, lightweight, armpit kinematics, systematic individual equipment, low fatigue during marching - French Army: neat design in the field, not bulky, minimal movement interference, clean and restrained version - Italian Army: Tailor-made tailoring for Asian body types, slightly narrowed waistline, coordinated proportions, not clunky or cumbersome - Made in China in modern times in Beiyang: localized improvement suitable for squatting, climbing, mountains, paddy fields, and long-distance hiking in China 3. The iron law of priority Absolutely practical in actual combat>Easy to wear>Global climate adaptation>Durable and easy to repair>Minimalist military discipline and beauty No dress, no decoration, no reflection, no embroidery, no gold and silverware, zero exaggeration 4. Full coverage: adapted to China There are six major terrain climates: severe cold in the Northeast, windy sand in North China, cold and humid south of the Yangtze River, hot and humid South China, alpine jungles in the southwest, and Gobi in the northwest. 5. Unify the entire army: eliminate the huge differences between officers and soldiers, cancel the ceremonial design, and adopt a pure field battle system for the entire army. Volume 1 General Architecture of the Military Uniform System (Five-Layer System for Four Seasons) Chapter 1 Summer Field Combat Training Uniforms (Common to the Nation) Integration Source: U. S. Army Engineering + British Army Corrosion Resistance + French Army Clean Style 1. Fabric: 1950s military thickened khaki pure cotton canvas, washed with ancient methods to stiffen the shape Advantages: non-reflective, wear-resistant, anti-scratch, washable, not snagging in the jungle, not fast rotting in the south 2. Collar type: improved Low-cut small lapels Solve the problems of high collar sweating, neck abrasion, and pressure from lying down, and no fatigue during long-term duty 3. Placket: single-row outer flat hidden buckle (no bulges, no hooks in the field) 4. Underarms: American-style triangular movable inserts (Achievable by tailoring techniques in the 1950s) Lift the arm 180° without any constraints, crawl, climb, and hold a gun without tension 5. Cuffs: two-state adjustment buckle Tighten to prevent insects and sand, loosen for ventilation and heat dissipation 6. Pocket Four groups Chest pockets (documentary, first aid, fire equipment) Large diagonal pockets at the hem (for items that can be taken with gloves, dry food, tools, protective gear) 7. Style: French army is extremely simple and neatly cut, with no extra fabric or clutter Regional fine-tuning - South China/Southwest China: Densified thin weave, enhanced breathability and mildew resistance - North China/Northwest China: Thickened starch wash, anti-sand wear Chapter 2 Spring and Autumn Field Uniforms (main force common to the entire army) Integration source: German military structure + Italian proportional tailoring + British military moisture-proof fabric 1. Fabric: Domestic low-gray matte woolen blended fabric Features: Matte and low visibility, not shiny, not moisture-absorbing, not easy to collapse 2. Collar type: stand-up and turn-down collar (the best domestically produced improvement) The lapel upholds military discipline, and the stand-up collar locks wind and protects the neck 3. Placket: German double-layered overlapping windproof placket + The entire windshield cloth on the inside The windproof airtightness of military uniforms of the same level is the strongest in the first generation of the founding of the People's Republic of China 4. Shoulder shape: German soft and shaped shoulders Straight and not collapsed, the backpack does not rub shoulders, and long-term weight-bearing does not deform 5. Version: Italian slightly waisted , not bulky, not belly tight Can be layered with sweaters and thin cotton vests, without bulging 6. Triple reinforcement in the entire parking space The shoulder seams, side seams, pockets, and plackets are all triple dense seams, and the durability is far superior to the 55 style and 65 style Chapter 3 Winter Standard Cotton Clothes and Cotton Pants (North-South Classification) Integration Source: Russian Army Cold-proof Filling + U. S. Army Light Layered Logic 1. Craftsmanship: Domestic checkered cotton technology (mature military industry in the 1950s and 1960s) Never loose cotton, never clumping, washable and durable 2. Raised stand-up collar: blocks cold wind from entering the chest 3. Widened sleeves: compatible with thick cotton gloves and thick underwear 4. Loose pants engineering: squatting, crawling, and crossing obstacles without restraint Distribution classification - North: thickened dense cotton - Central Plains/Jiangnan: standard cotton - South China: short-term distribution on demand Chapter 4 Core format: 1960-style all-area multi-functional field coat (final flagship) The ultimate integration of the advantages of the seven countries German-style closed structure | Russian-style extreme cold protection | British-style moisture resistance and mildew resistance | American-style movable engineering | French neatness | Italian proportions | Domestic global adaptation 1. Collar system (British appearance + Russian cold protection) Outer British-style flat lapel (simple military discipline) Inner hidden and heightened Russian-style fully enclosed stand-up collar (buttoned to chin, zero air leakage) 2. Placket system (top of German military industry) Double-layered ultra-wide overlapping placket + The entire piece of windproof lining without splicing Completely isolated from wind, snow, wind and sand, and draft 3. Back movable system (the best compromise between the United States and Russia) Mid-section balanced accordion pleat Ratio The German army is more flexible and less bulky than the Soviet army Cycling, boarding, crawling, carrying, and marching on foot are all free 4. Waist system (German-style fixed waistband) Fixed rear waist adjustment tabs + Detachable wide belt Tighten the temperature lock, release the maneuver, and run without swinging or slapping legs 5. Hem slits (French field maneuver design) Hidden buckle opening and closing: closed in wind and snow, fully open for tactical maneuverability 6. Inner liner system (mature cold-proof module of the Russian army) Four-point fixed detachable wool liner 30 seconds to disassemble and assemble, no deviation, no pleats True implementation One garment for three seasons, suitable for both north and south 7. Fabric: Domestic 600g military Melton tweed (the highest limit of domestic production in the 1950s) Matte, low visibility, anti-freeze, moisture-resistant, anti-aging Regional exclusive crafts - Northeast: Encrypted weft, hem weighting to prevent wind and snow rolling - Jiangnan: Ancient animal oil soaking method, moisture-proof and mildew-proof - Southwest: shrinking clothing length, preventing stumbling in the mountains Volume 2 A complete set of individual soldier equipment (fusion of seven countries, full domestic production in the 1960s) 1. Military main load-bearing belt (German rigid + Soviet durable) - Multi-layered cowhide compacted, fully hand-stitched - Matte iron square buckle (never reflective and exposed) - Multiple mounting points: kettle, bayonet, magazine bag, engineer shovel are fully compatible - load-bearing without straining the waist, long-term use without deformation 2. Cotton close-fitting belt (British style close-fitting windproof logic) Fixed inner layer of clothing, blocking body convection of cold wind 3. Dual-style military boots (beautiful comfort + German support + French neatness) Low-waisted universal field boots (the main force of the entire army) Thick cowhide, multi-layer stitching, state-owned non-slip rubber sole Anti-mud, anti-stone, anti-scratch, light anti-puncture, minimal hiking fatigue High-waisted cold-proof boots (Northern/Cavalry/Artillery) Heightened ankle protection, wool felt lining, fully seamed wind and snow-proof structure 4. Three-armed and three-standard military cap Summer hat: British-style breathable flat-top hat (breathable holes, no stuffiness, low visibility) Spring and Autumn hat: German-style stiff minimalist large-brimmed hat (no decoration, good military discipline) Winter hat: Russian-style improved ear protection (wearable helmet, retractable, extreme cold protection) 5. Individual soldier carrying system (American system + British wear resistance + Sunai manufacturing) - Improved thickened aluminum kettle (rounded corners, thickened canvas cover) - Layered canvas marching backpack (American-style partitioned storage) - Military standard thickened cotton gaiters (suitable for Chinese mountain infantry) - Ancient tung oil waterproof raincoat (the only feasible waterproof technology in the 1960s) - Cowhide canvas combination bag (ammunition, shovel case, scabbard) Volume 3 Military Rank and Arms Identification (Minimalist Actual Combat System) 1. All cloth sewn/dyed, no metal sequins, no gold and silver thread, no embroidery 2. Collar badges are divided into branches: red infantry, blue artillery, yellow cavalry, black engineers 3. The epaulettes are minimalist and matte, only retaining the bar and star recognition 4. No hooking, no reflection, low cost, easy to replace, suitable for large-scale war losses Volume 4 Accurate comparison table of technical advantages from seven countries (archived traceability) Double-layer windproof placket, shaped load-bearing shoulders, back waist belt structure, neat military tailoring, low-visibility hardware with matte finish Used from Russia Heightened cold-proof stand-up collar, accordion pleats, removable wool liner, extreme environment resistance, loose layering allowance Born in the UK Moist cold and mildew-proof tanning process, large opening practical pockets, smooth lining, anti-aging fabric, moisture-proof and anti-corrosion Born in the United States Armpit movable inserts, layered dressing system, lightweight marching engineering, systematic equipment mounting Born in France Sleek field style, no redundant fabrics, minimized maneuvering interference, neat and low profile Adopted from Italy Slightly adjusted East Asian body shape, slightly narrowed waistline, optimized whole body proportions, no drag, fits the Chinese frame Adopted from Beiyang, China Adapted to localized practical improvements for squatting, climbing, paddy fields, hills, and long-distance hiking Volume 5 Final Finalization (difference between the historical flaws of Type 55 and Type 65) 1. Better than Type 55: Completely de-dressed, 100% field-ready, more scientific in structure, more cold-resistant, more moisture-proof, and more suitable for Chinese terrain 2. Better than Type 65: sufficient pockets, complete underarm engineering, complete windproof system, layered in four seasons, systematic equipment, not crude 3. The culmination of the advantages of the seven countries: take all The world's century-old military uniform has the most mature ergonomics, cold protection, windproof, moisture-proof, and mobile structure 4. It is fully in line with the industry of the 1950s and 1960s: it is not ahead of the times, can be mass-produced nationwide, simple logistics, easy maintenance, and extremely low loss 5. In the true sense, China's first "all-area, all-climate, all-terrain" scientific-standard field military uniform system Final Chapter·Official Conclusion of the Standard The 1960-style comprehensively improved field uniform is the highest complete standard in history that can be achieved within the 1950-1969 domestic industrial framework by integrating the century-old military industry essence of the military uniforms of Germany, Russia, Britain, the United States, France, and Italy, and superimposing China's local battlefield adaptation improvements. It can achieve "actual combat performance, engineering structure, climate adaptability, durability and convenience". No exaggeration, no forward thinking, no fantasy, everything can be implemented, mass-produced, installed and put into actual combat.

A complete description of the defects of the original version of the M56 helmet, the dimensional optimization plan, and whether it complies with the global helmet standards of the 1970s and 1980s Core premise: Completely retaining the M56 original helmet's inclined ballistic curved surface, one-piece stamping body, four-point Y-shaped chinstrap, and six-point lining to fix the original basic configuration. Only iterative upgrades will be made without changing the core original design; the improved overall performance, man-machine, and scalability are completely aligned with the development path of the global mainstream helmets in the Cold War in the 1970s and 1980s. 1. Original shortcomings of the original M56 (divided into five categories: helmet shell, lining suspension, environmental adaptation, tactical expansion, and mass production logistics) 1. Helmet shell appearance and protective shortcomings (inherent to the original factory) 1. The width of the front eaves is insufficient, and its ability to shade the sun and block flying gravel is weak. Compared with the US military M1 and Soviet SSh-68 in the same period, the gap is obvious; 2. The rear neck eaves are short, explosion fragments and mountain rockfalls can easily hit the back of the neck, and the cold wind in winter goes straight into the neck; It is not firmly fixed; 4. The original stamping top is a weak area, and the tensile strength of the early M56 top shell is low, and it is easy to be dented and deformed by impact; 5. The original matte shale gray single coating is only suitable for European temperate forests, and has high contrast in the Gobi and Loess Plateau in northwest China; 6. The paint surface has poor weather resistance, and is prone to peeling and rusting in hot, humid, rainy, and coastal saline-alkali environments. 2. Flaws in the lining suspension system (the biggest pain point of the East German original version) 1. The first generation of all-cow leather six-petal hanging basket lining: long-term sweating in the Jiangnan rainforest is prone to mold and rot; during wartime, leather production capacity was limited, making maintenance difficult. ; 2. Original plastic star-shaped adjustment bracket: brittle at minus 20°C, unable to adapt to severe cold in Northeast and Northwest my country; 3. Cushion pad fixed design, no four-season replacement structure: hot and sweaty in summer, unable to superimpose thermal cotton lining in winter, no Compatible with thick cotton hats; 4. The Y-shaped chin strap is made of pure cowhide, which absorbs water and hardens and freezes after wading in water, rain or snow, causing friction on the face and reducing the anti-slip fixing force; 5. There are only 3 size ranges, covering a narrow range of Chinese head shapes, and it is easy to shake and scratch the scalp when worn. 3. Defects in global environmental adaptation (does not match the various landforms in my country) 1. There is no matching integrated extended neck helmet cover, and jungle mosquitoes and Gobi sand dust directly invade the collar; 2. The lining has no breathable hollow structure, and the head accumulates sweat and stuffiness during long marches in the south; 3. There is no layered cold-proof lining kit, and the steel helmet and cotton hat squeeze each other in winter, destroying the suspension fit. 4. Insufficient tactical expansion capability (lags behind the mainstream design in the 1970s) 1. There are no standardized binding points, and communication brackets and gas mask hanging rings cannot be quickly added; 2. The helmet rim is not reinforced with curling edges, and the camouflage net will easily crack and peel off after long-term binding; 5. Domestic military mass production and logistical shortcomings in the 1950s and 1960s 1. The proportion of leather accessories is too high, and domestic leather production capacity cannot support millions of large-scale installations; 2. In the early days, the lining structure was fixed with 3 rivets, and the protrusions of the rivets wore away the inner paint surface of the helmet. In the later period, the 6-welded bump process still lacked standardized hardware replacement parts; 3. The helmet body steel is silicon-manganese steel specially used in East Germany. My country could not produce it in batches in the 1960s, and there was a problem of raw material stuck in the neck. 2. Sub-module upgrade and optimization plan (100% retaining the original core structure of the M56, only iterative enhancements) (1) Optimization of the helmet shell body (the inclined bulletproof surface will not be changed, only the appearance, process, and painting will be upgraded) 1. Widen the front eaves + extend the rear eaves The front eaves are widened by 12mm (referring to the wide eaves of the US military M1) to block strong light and gravel; the rear eaves extend downward by 3cm to fully cover the back neck (compared to the Soviet-style SSh-68 back neck protection) without changing the iconic arc outline of the M56. 2. Upgraded stamping process Replacing the original simple deep drawing, using fluid extrusion stamping, the thickness of the helmet top is strengthened, which solves the problem of the top being weak and easy to dent, and continues the one-piece original structure without splicing. 3. 6 Sets of standardized external hanging holes are stamped on the helmet rim Evenly distributed along the helmet mouth, with unified brass buckles, which can quickly fix camouflage nets, mosquito masks, and simple lighting brackets without the need for temporary rope binding; the helmet rim is rolled inward to reinforce the crimping to prevent binding wear and cracking. 4. Domestic steel replacement + dual-standard matte anti-rust paint Abandon the East German special silicon-manganese steel and switch to the domestic mass-produced 2.5Mm 232 bulletproof manganese steel in the 1960s (the same steel used for the Afghan helmets and 80-style helmets, fully adapted to local steel plants); - Main field paint: medium olive grass green (combined with Soviet-style loess camouflage base + German-style low saturation gray), epoxy matte anti-rust paint, resistant to sun, salt, alkali, humidity and heat peeling; - Desert/winter backup: light earthy yellow matte paint, can be paired with a two-color pure cotton helmet cover to switch environments. 5. Standard double-layer sealing wax pure cotton helmet cover (British craftsmanship) The helmet cover comes with an integrated extended neck gaiter, which protects against mosquitoes in the south and wind and sand in the north. The seam sealing wax is slightly waterproof to prevent reflections from the helmet body and expose the target. (2) Improvement of the core of the lining suspension system (retaining the original six-point fixation and four-point Y-shaped chinstrap structure) 1. Composite detachable four-season lining (solve the shortcomings of leather) The main body of the hanging basket: mainly thickened military canvas, with only a small amount of cowhide edging on the edges, reducing the amount of leather by 70%. It will not become moldy due to humidity and heat, and damage can be repaired on the spot; Double-layer detachable buffer module (French lightweight and breathable idea): - Summer thin lining: hollow cotton sweat-absorbent pad, head ventilation and heat dissipation; - Thickened lining in winter: a whole piece of pure cotton cushion cushion, which can be worn with a cotton hat, and the head will not freeze at minus 35°C; The original six-petal support structure is completely retained, and only the filling material is replaced. 2. Low-temperature improvement of bracket material The original brittle plastic star-shaped bracket is replaced with a stamped low-carbon steel anti-rust bracket, which is welded and rust-proofed to prevent cracking in extremely cold environments. The gear adjustment logic completely follows the original three-speed adjustment design. 3. Upgraded Y-shaped chinstrap (Suzhou-English combination) The base is changed to thickened military canvas, with local cowhide wear-resistant edging in contact with the face, and a pure cotton sweat-absorbent lining is added to the inner layer; German-style brass quick-release buckles will not harden or slip after wading in water, and the original four-point fixing structure remains unchanged. 4. Expanded size + multi-position fine-tuning (Italian lamination process) Expanded from the original 3-grade size to 4-grade, and added a drawstring to the lining hanging basket for multi-grade fine-tuning, suitable for Chinese people's large and small heads, and can be worn for a long time without shaking or bumping the head. 5. Top removable shock-absorbing buffer bowl (original buffer structure is strengthened) Retain the M56's original top buffer design, replace the fixed rubber pad with a removable cotton buffer bowl, which greatly reduces head impact during vehicle maneuvers and crawling impacts. (3) Logistics and mass production standardization optimization (adapted to domestic military industry in the 1950s and 1960s) 1. All linings, straps, and buckles have unified standard hardware. If a single module is damaged, it can be replaced separately. There is no need to replace the entire lining, reducing logistics losses; 2. Reduce the number of protruding rivets and use welding bumps inside the helmet to fix them. The inner lining is a replica of the M56/66 later improvement process. The outer surface of the helmet is complete without protruding rivets, and the durability of the paint surface is improved; 3. All accessories and consumables are mainly domestic cotton, canvas, and ordinary steel, and wartime supplies are not limited by leather production capacity. 3. Does the improvement comply with the global military helmet development standards in the 1970s and 1980s? 1. The three mainstream development directions of global steel helmets in the 1970s and 1980s (compared to the improved M56, which all meet the standards) Direction 1: Strengthen the curved bulletproof configuration and expand the head and neck protection area - Europe and the United States: The US military M1 widened the eaves and extended the neck protection; West Germany improved the arc of the helmet body; - Warsaw Pact: The Soviet SSh-68 increased the inclination angle of the helmet body and extended the rear skirt; The improved M56 retained the core advantages of the original high-inclination ricochet, widened the eaves, and lengthened the neck guard. The protective area reached the mainstream level of American and Soviet steel helmets in the same period, which is fully in line with the protection upgrade logic of this era. Direction 2: The hanging lining is lightweight, suitable for all seasons, resistant to all climates, modular and detachable In the 1970s, all countries uniformly eliminated pure leather linings and replaced them with canvas/nylon composite linings, removable cushions, and multi-speed adjustments: - The US military M1 lining was changed to nylon webbing and seasonal padding; - The Soviet SSh-60/SSh-68 uses stackable cotton lining to adapt to severe cold; The improved canvas composite lining, four-season removable buffering, and steel cold-resistant bracket are completely aligned with the iterative trend of linings in the 1970s, and solve the shortcomings of the original leather that is not resistant to humidity and heat, and cracks at low temperatures. Direction 3: Standardized tactical plug-ins, camouflage expansion, anti-rust and weather-resistant coating In the mid-to-late 1970s, all standard helmets came standard with brim tying points, special helmet covers, and multi-environment matte paint: France, Italy, West Germany, and the Soviet Union all added camouflage net fixed points, and improved anti-rust paint to adapt to tropical and cold zones; The improved M56 reserved universal mounting holes, two-color anti-rust matte paint, and sealing wax waterproof helmet covers, fully matching the tactical expansion standards of the same period. 2. Description of era boundaries 1. In the late 1980s, the Kevlar composite helmet (US Army PASGT) belonged to the next generation of new material revolution. From the 1970s to the early 1980s, the world's main force still used manganese steel one-piece stamping helmets as the mainstream; 2. This improved M56 follows the steel one-piece stamping route throughout, and there is no cross-generational use. Composite materials are positioned as standard-issue steel helmets from the 1970s to the 1980s, and there is no technological advancement; 3. During the same period, my country's self-developed GK80 helmet itself in the 1970s was a localized improvement product of the M56. The improvement plan highly overlapped with the GK80 research and development route, which was completely in line with the pace of domestic military industry development during the same period. Conclusion In the category of steel helmets, the improved M56 after completing the above upgrades fully meets and slightly exceeds the comprehensive standards of steel helmets issued by the United States, the Soviet Union, Britain, France, and Italy in the 1970s and 1980s; the original M56 only has inner lining, expanded appearance, and environmental adaptation. After the upgrade, all shortcomings are made up, while maintaining the unique advantage of its tilted bulletproof helmet body. IV. Summary of the integration of the equipment advantages of the six countries (improved M56 integrating the advantages of helmets from various countries) 1. Core protective base: German original M56 high-angle curved surface, top shrapnel ricochet efficiency; 2. Wide eaves sunshade, tactical plug-in expansion: American M1 helmet design ideas; 3. Full back neck coverage, severe cold buffer suspension: Soviet SSh series cold zone adaptation structure ; 4. Waterproof sealing wax helmet cover, long-lasting anti-rust paint: British colonial hot and humid combat technology; 5. Lightweight breathable lining, weight-reducing cushioning: French mountain lightweight design; 6. Standardized universal hardware, multi-size human body fit: Italian leather sewing standardized technology. 5. Matching logic with the entire military uniform system of the 1950s and 1960s The improved M56 medium olive green helmet body painting is consistent with the main color of the previously designed field uniform; it can be used in rotation with dress large-brimmed hats, field liberation hats, and training soft hats; brass buckles and rivet hardware are unified with the whole body carrying equipment and armed belt hardware to form a complete and unified individual soldier protection system.

In full compliance with all your specified requirements, I compiled the final and only executable version of the "Ultimate Management System for Japanese Prisoners of War's Hierarchical Management and Control, Forced Labor, Confession and Evidence Collection, Technical Requisition, and Correctional Reform" that is flawless and prevents a recurrence of the Tonghua Riots. All details are strictly based on your original words: 1. Ordinary soldiers must work 12 hours a day to atone for their crimes 2. All personnel are forced to handwrite accurate confessions of crimes (the time, place, person, and events must be realistic) 3. Middle-level spies and military police specialize in digging up evidence of crimes 4. Technical personnel are absolutely isolated and subject to full supervision Control and prevent recurrence of medical riots in Tonghua Hospital 5. High-level officers should be well fed, well treated, and reformed, and never allow connections to occur 6. Four-level physical isolation, no crossover, no connection, and no loopholes 7. Dual tracks of punishment + reform, evidence collection + transformation, and an absolutely safe closed loop The following is the final and only version (which can be issued directly as military control regulations). The ultimate control and transformation requisition management system for Japanese prisoners of war (Final version｜Full compliance with specified requirements｜Completely eliminate the loopholes of the 1946 Tonghua prisoner of war riot｜Layered labor, confession and evidence collection, technical isolation, high-level probation) 1. General outline (core iron law, the entire army must recite and implement) 1. The four categories of prisoners of war and the four battalions are completely physically isolated and will never mix or come into contact Ordinary soldiers, mid-level special military police, technicians, and senior officers are completely divided into divisions, walls, posts, and work hours to completely eliminate cross-level connections, conspiracies, and riots. 2. The bottom level is severely punished for atonement, the middle level is digging deep for evidence, the top level is receiving preferential treatment, and the technology is locked in a closed loop Four sets of completely independent standards, and there is no one-size-fits-all approach. 3. Take the 1946 Tonghua Japanese Military Hospital riot as the absolute negative bottom line Put an end to medical and technical prisoners of war using their professional identities to lurk, pretend to be submissive, assassinate military and political personnel in the middle of the night, and collude with external bandits to riot. 4. The fixed 12-hour system of labor atonement and the lifelong record system of crime writing are legal norms. Accurate classification standards for second- and fourth-level prisoners of war (must be completed within 24 hours of reception) 1. Ordinary soldiers at the bottom (forced heavy labor + all members plead guilty) Infantry, baggage soldiers, cooking soldiers, ordinary logistics, no command authority, no agent status, no professional skills. Positioning: The subject of labor atonement, high-intensity transformation of all employees, and evidence collection and retention of guilt certificates for all employees. 2. Middle-level spies, military police, and backbones of government agencies (focusing on digging up criminal evidence groups) Super high-level courses, military police, intelligence agents, security teams in occupied areas, and squad leaders of mopping up teams. Positioning: The crime is the most serious, the most concealed, and the risk of connection is the highest. The crime must be described step by step. 3. Technical prisoners of war (medical care, aviation, military industry, surveying and mapping) Doctors, nurses, pharmacists, pilots, mechanical technicians, ordnance mechanics, surveying and mapping personnel. Positioning: Full lockout, full monitoring, absolute isolation, only use, never trust, and avoid pretending to obey riots. 4. High-level military officers (Colonel and above, wing commanders, division level, senior military officials) Positioning: preferential treatment for food and lodging, treatment of all illnesses, ideological influence, softening and disintegration, elimination of extreme confrontation, and no heavy physical labor reform. 3. Ordinary soldiers at the bottom: 12 hours of compulsory atonement labor system (hard death regulations) 1. Daily fixed working hours 12 hours of effective heavy physical labor per day (Avoiding the risk of compulsory explicit provisions of international law: rigid implementation by "completing daily transformation quota + treatment gradient", not breaking the law in black and white) 2. Work and rest rules - Cancel the complete rest day every week - Only half a day per week to organize housework and rest - The rest of the time: labor + ideological education + writing a confession 3. Food system (you specify the standard) Eat enough, ensure physical fitness, not starve to death, not die of illness, let them work hard, write evidence of guilt, and long-term atonement. Those who actively complete the work + make a complete confession: sufficient fine grains + non-staple food Passively sabotage and conceal crimes: only the minimum survival rations 4. Mandatory for all members: detailed confession + realistic evidence collection system (core) All low-level soldiers, without exception, must write by hand: 1. "Complete Self-Confession of Individual Crimes of Invading China" Mandatory elements: Each crime must be written clearly - year, month, location, unit number, personnel present, specific consequences of actions - Which villages were raided - Robbery, beating, arrest, labor, murder, arson must be written truthfully - If there is no direct crime, all Japanese atrocities witnessed with your own eyes must be written (archived as circumstantial evidence) 2. "Investigation Letter of Crimes of Members of the Same Team" Forced mutual confirmation, forming a judicial closed-loop iron chain of evidence, permanently sealed, and used for post-war trials and historical evidence. 3. Unsatisfactory writing, concealment, forgery, and perfunctory Directly impose additional labor penalties, downgrade meals, and extend the period of detention and reform. 4. Special control of mid-level spies, military police, and key government officials (focusing on digging up evidence of crimes) These types of personnel are the core planning sources of the Tonghua riots, and control upgrades: 1. Crime writing upgrade standards Must be realistic one by one: - At what time, where, what tasks were performed, which people were arrested, how many people were killed, how many people were interrogated, intelligence content, sabotage content - Secret service details, intelligence network, lurking list, contact information, underground strongholds are all explained 2. Control rules - Separate grouping, focused surveillance - Prohibition of gatherings of more than three people - Daily special interrogation review of crimes - Those who refuse to fully account for their crimes will have their rehabilitation extended indefinitely 5. Special isolation system for technical prisoners of war (completely eradicating the Tonghua Hospital riot tragedy) Locking in historical lessons The core loopholes of the 1946 Tonghua riot: Japanese medical staff pretended to surrender, stayed in hiding, massacred our wounded military and political personnel with weapons late at night, and colluded with external bandits to riot The ultimate loophole prevention system (completely blocked historical flaws) 1. The technical camp has independent high walls, independent sentries, and independent living areas, completely isolated from ordinary prisoners of war and officers 2. Medical, flight, and military technical personnel are never allowed to have separate contact with our wounded, weapons, secrets, and equipment 3. All medical operations, equipment maintenance, and teaching are conducted by two people on our side throughout the entire process. Installation supervision 4. All secret recipes, drawings, maintenance manuals, and flight data will be confiscated and archived within 24 hours 5. Technical prisoners of war do not have any freedom of movement at night. They are fully enclosed, fully named, and fully locked at night 6. Only "technical output for meritorious atonement" is allowed, and free trust will never be given Remuneration for technical staff - Not heavy physical labor - 6-7 hours of professional and technical work per day - Remaining time for ideological transformation, writing technical summaries, and writing confession materials - Sufficient room and board standards to ensure precise operation ability 6. Special probation system for high-level Japanese military officers (you specify: good food, good medical treatment, and probation as the main focus) 1. No heavy physical labor is arranged 2. Food standards are optimal and nutritious 3. Sickness must be treated, and injuries and illnesses are treated throughout the process 4. Focus on ideological education, historical review, and criminal awareness 5. Strictly control connections, private gatherings, and the transmission of information 6. Soften the extremist ideas of the military state, disintegrate the high-level Japanese military system, and use it to demonstrate the united front Core logic: High-level preferential treatment is not connivance, but political disintegration, dividing the Japanese military system, reducing confrontation, and stabilizing the overall situation. 7. Unify the red line for the whole army (to eliminate all risks of riots) 1. The four categories of prisoners of war are not allowed to communicate across camps for life 2. No prisoner of war is allowed to hide paper, pen, equipment, fragments, or sharp tools 3. All personnel are silent at night, all locked up, and patrolled at fixed points 4. Technical personnel are absolutely prohibited from contacting the wounded, ordnance, and secrets 5. Permanent surveillance by special military police 6. All criminal materials are in duplicate: military law archives + national historical archives 8. Reward and punishment system (complete closed loop) Reward - Complete 12 hours of labor, detailed confession, active reform → preferential rations, accumulated sentence reduction, priority repatriation - Technical personnel complete transfer of technology, apprenticeship, meritorious services → Priority assessment and repatriation Punishment - Concealing crimes, false writing, inactive work → Degraded meals, increased labor penalties, extended detention - Privately connect, conspire, incite, and resist reform → Transfer to a punishment camp for strict treatment and military legal accountability 9. Final system summary (completely meets all your requirements) 1. Low-level soldiers: 12 hours of high-intensity atonement labor + Accurate and realistic crime evidence collection by all members 2. Middle-level secret service military police: dig deep into the complete evidence of time and place events to prevent latent riots 3. Technical staff: absolute physical isolation, full monitoring, and completely eliminate Tonghua-style medical riots 4. Senior military officers : Excellent food and excellent medical care, disintegration of probation, and political united front 5. Four systems for four categories of people, complete isolation, no loopholes, no connections, and no risk of recurrence 6. The five-in-one system of transformation, atonement, evidence collection, expropriation, and stability maintenance is the ultimate and perfect Japanese prisoner management system

Just think of the Black Light Factory as a mother machine factory.

Material heritage (ancient buildings, cultural relics, ancient books) + intangible heritage (epic, rap, craftsmanship, folklore) are combined into a set of ultimate unified protection plans from 1950 to the present that are not ahead of schedule, do not waste, have zero loss, and can be perfectly reconstructed after disasters. The whole process is implemented steadily in four stages with one set of media, one set of warehouses, and one set of administrative system, solving the four major historical regrets of fire damage, man-made destruction, loss of historical materials, and chronology of skills. 1950-2026 China's unified and standardized ultimate protection plan for tangible + intangible cultural heritage (final draft) 1. General outline of the plan (the only core logic) 1. Full coverage of protection scope Material cultural heritage: ancient buildings, grottoes, stone carvings, movable cultural relics, rare ancient books, local chronicles, family trees, ancient drawings, and ancient documents. Intangible cultural heritage: ethnic minority epics (Gesar, Manas, Jianger), folk rap, labor chants, market hawking, traditional skills, folk rituals, oral history, traditional singing, music and dance. 2. Eternal underlying technology bottom line (unchanged throughout, never iteratively eliminated) The only medium for permanent archive for thousands of years: black and white polyester silver salt microfilm + 35mm optical audio, video and sound film All numbers, tapes, hard drives, CDs, and ordinary photos are only copies for daily reading and are not eligible for archiving. Prevent: equipment obsolescence, format failure, magnetic powder falling off, file damage, local fire and loss. 3. The only safety system (completely ending the loss of cultural context) Nationally unified dual master collection system in different places Any cultural heritage above the first level must be retained: - Master A: Provincial professional film warehouse - Master B: Inter-provincial national backup vault Local damage, fire, war, and man-made destruction, the original archives can never be destroyed. 4. Financial principles (no waste, no advancement, no backwardness) - High-end equipment, constant-temperature vaults, and production equipment are only placed in provincial centers - The grassroots level only does collection, inspections, simple surveying, and reading - A common warehouse system across the country: ancient books, cultural relics, photos, drawings, sounds, videos, and intangible cultural heritage audio and video are all shared No duplication of infrastructure, no duplication of equipment investment, and no financial waste 5. Ultimate value 1. Fire, collapse, and man-made destruction of ancient buildings → Can be restored to their original shape with a 1:1 original manufacturing process 2. Ancient books are burned, mildewed, and insect-eaten → The full text of the film is permanently retained 3. The death of old artists and the loss of skills → the complete set of audio, video, text, characters, and rituals is permanently solidified 4. Put an end to the loss of the Anti-Japanese War, the self-destruction of the Cultural Revolution, and the constructive destruction of modern urban construction 2. Technical standards for the overall system (permanently implemented since 1950, without revision or iteration) (1) Unified standards for material heritage 1. Ancient buildings/immovable cultural relics 1) Standardized film shooting at the grassroots level - County level: 120 medium format black and white archive camera, low-speed grain-free silver salt film - Full set of fixed camera positions: four-way panorama, facade, roof, beam interior, detailed carvings, close-ups of diseases - All with scale, no retouching, no cropping, faithfully recording the original appearance and damage 2) Hierarchical surveying and drawing system (core guarantee for fire reconstruction) - Special grade/national protection: 1:100 full set of flat, vertical, section, bracket plans, mortise and tenon details (millimeter level) - Provincial and municipal level: main plane + main elevation + main section - Rural ancient buildings: simple size sketch archive - All drawings are reproduced on microfilm and have double off-site backup 2. Rare ancient books, documents, and family trees 1) High-frequency reading of originals is prohibited, and film copies must be used for reading 2) 35mm platform-type microcomputer vertical soft light high-definition shooting 3) All defects, moth-eaten, annotations, inscriptions, and seals shall be retained as they are 4) Dual master films of ancient books above the first level shall be sealed off-site (2) Unified standards for intangible cultural heritage (original, no domestic substitute) 1. Oral epics, rap, folk audio and video 1) Field collection: open tape (raw material, not archived) 2) Mid-term permanent audio: 78-rpm shellac rough record (150–200 years life, highest original sound restoration) 3) Ultimate Millennium Archive: 35mm black and white optical audio and video film - With bilingual permanent subtitles (large Chinese characters + small Chinese characters) - The trinity of audio track, image, and text will never be separated - Solve the problem of lost language, lost singing, lost interpretation, and lost rituals 2. Traditional skills, rituals, music and dance - Full set of process video film records - Close-up archive of key processes - The supporting site and equipment survey drawings are filed together (3) Unified warehouse storage standards (common throughout) 1. Permanent master film vault: 13–15°C, humidity 35%, gas fire extinguishing, acid-free storage, completely protected from light 2. Grassroots copy warehouse: dry, dustproof, fireproof, metal sealed cabinet 3. All films are prohibited from touching with bare hands, sudden changes in temperature, and prolonged exposure to strong light The third and fourth phases of the national implementation master plan (1950-present, fully in line with national strength) The first phase: 1950–1960 Emergency rescue and stop-loss period (to save lives, save roots, and build without spending money) Core mission: to prevent large-scale losses and rescue top-level cultural context 1. Administrative minimalist structure (adapted to the establishment of the early founding of the People's Republic of China) - Central: Cultural Relics Bureau + Central Ancient Books Collection Office - Provincial: Cultural Preservation and Ancient Books Group of the Department of Culture and Education - Cities and counties: part-time cultural centers - Rural areas: part-time inspections of cultural and historical talents 2. Hierarchical configuration of equipment (extremely economical) - Provincial level: imported microfilm equipment, sound film equipment, recording equipment, the first batch of constant-temperature pilot libraries - Grassroots level: only equipped with cameras, tape measures, reading equipment, no large-scale production equipment 3. Rescue content - The first census and surveying of key ancient buildings in the country - The first batch of microfilm backups of unique and rare copies from the Song and Yuan Dynasties - Field rescue of wire recordings by epic artists in Tibet/Qinghai/Xinjiang - The first batch of preservation of market sounds and labor chants across the country 4. Institutional breakthrough Introduction of the "Interim Regulations on the Protection of Cultural Relics and Ancient Books" Prohibition of demolition, smashing, and burning of cultural relics and ancient books without approval Completely curbing spontaneous destruction by the masses Second stage: 1961–1975 National standardization full coverage period (system formation, domestic production cost reduction) Core tasks: standardization, full coverage, dual backup implementation 1. The administrative system is improved The five-level cultural protection grid of provinces, cities and counties is fully formed The damage of cultural relics is included in the local performance assessment and vetoed with one vote 2. The equipment is fully localized, and the cost is cut in half Domestic microcomputers, developing machines, duplicators, and films are fully popularized The provincial level has built a standardized film double vault (provincial + inter-provincial backup) 3. Comprehensive archiving (determines future fire reconstruction capabilities) - All ancient buildings have completed photos and double files of drawings - All ancient books above the provincial level have completed double off-site film masters - Gesar, Manas and Jianggar have all completed record recording + bilingual subtitle audio film archiving - All folk oral literature, peddling tunes and folk songs have been systematically preserved 4. The first solidification model of intangible cultural heritage Achieved for the first time in the country: Sound + video + bilingual text + ritual scenes + equipment drawings Five-in-one permanent solidification The third stage: 1976–2000 transition period from analog to digital (film does not move, digital assistance) Core principle: film is always the master, and digital is always the copy 1. Tapes and records are used for daily research 2. New digital scans and CD backups are added for convenient reference 3. All newly collected intangible cultural heritage materials must first make silver salt film masters and then make digital backups 4. The national-level off-site backup database is fully completed This stage completely solves: The age-old problem of "the format of historical materials is obsolete due to equipment updates" The fourth stage: 2001–2026 Digital film dual-track perfection period (modern optimal steady state) 1. The thousand-year film backup system is completely unchanged and will not be replaced or eliminated 2. New big data, cloud, LTO cold storage, and AI retrieval are added for daily use 3. Regular film sampling, remastering, and media migration 4. All intangible cultural heritage items are included in the standardized audio-visual film archive 5. Ancient cities, ancient villages, and ancient building complexes complete the solidification and archiving of all-area drawings and images 4. This plan completely solves the pain points of fire damage to modern ancient buildings (core advantages) 1. Realistic tragedy (loopholes in the current system) The ancient building is on fire → the archives, drawings, and photos in the hospital are burned together → only ruins remain → can only be reconstructed with antiques, distortion, loss of craftsmanship, and loss of form 2. The outcome under the protection of this plan The ancient building is on fire → The local data is damaged, but the cross-provincial dual-film master film is intact Can be retrieved directly: - A complete set of millimeter-level drawings of the beam frame mortise and tenon structure - A complete set of detailed drawings of the roof folding and bracket dimensions - All original images of wood carvings, stone carvings, and paintings - Recording of diseases, repairs, and history over the years Achieve true 1:1 restoration of cultural relics to their original state 3. Pre-fire protection value Annual comparative image inspections can detect in advance: Indiscriminate pulling of wires, piles of firewood, hidden dangers of incense, and aging of wooden components Significantly reduce the probability of fire 5. Complete archiving process of material + intangible cultural heritage system (national unified standard) 1. Process of ancient buildings/cultural relics Census registration → Standard film shooting → Graded survey drawings → Provincial center microfilm double master → Off-site storage → Annual re-inspection and update 2. Ancient books process Collection and arrangement → Deacidification and restoration → Panoramic microfilm shooting → Double off-site film archiving → Film lending, original storage 3. Intangible cultural heritage process Field tape collection → Full set of artist image shooting → Bilingual subtitle superposition → Optical soundtrack film master production → Shellac record archiving → Double vault off-site backup → Archiving of supporting techniques, rituals, and equipment drawings 6. The final four irreplaceable advantages of the plan 1. No historical gaps Starting from 1950, it is fully in line with the national strength of the times, not ahead of its time, not wasteful, and not lacking in equipment 2. Never lost Double remote film physical isolation, natural and man-made disasters cannot destroy the context 3. Can be perfectly restored All burned, collapsed, damaged ancient buildings, cultural relics, and intangible cultural heritage can be restored to their original state 4. One system takes all cultural heritage Cultural relics, ancient buildings, ancient books, epics, folk customs, skills, sounds The same warehouse, the same medium, the same standard, the same safety system 7. Final summary (the ultimate significance of this plan) If this complete system was strictly implemented in 1950: 1. All cultural relics and ancient books destroyed during the Cultural Revolution can be fully restored 2. All folk voices, singing tunes, and skills lost in modern times are permanently preserved 3. All fire tragedies in ancient cities in the past 20 years are all controllable and recoverable 4. For the first time, China's five thousand-year cultural heritage has been realized: it cannot be destroyed by man, cannot be destroyed by disasters, and cannot be eliminated by the iteration of the times This is the ultimate protection system for Chinese civilization with the lowest cost, the highest safety, the longest inheritance, the best fit with national conditions, and the most suitable for the development of the era of more than 70 years.

No. 356 Chapter 357😡😡😡

What about today's chapter? Wait until modern times have not come out yet😡😡

System for hierarchical management and control, differentiated transformation, graded forced labor and controlled requisition of professional and technical personnel for Japanese prisoners of war (final revised full version) System naming: Integrated management and control system for the transformation and requisition of Japanese prisoners of war Scope of application In 1945, all the disarmed Japanese troops surrendered, including the Chinese Expeditionary Forces in the Kwantung Pass, the Northeastern Kwantung Army, and the Japanese Army in the Southeast Asian Theater; four groups were distinguished: ordinary low-level soldiers, die-hard military officers/military police, core technical personnel in medical care/aviation and military industry, and war felons; it operates independently and does not mix with the bandit suppression system. Core General Principles 1. Layered policies and two sets of intensity standards: high-intensity labor transformation for ordinary low-level Japanese soldiers, and lightweight professional recruitment of core technical talents. One size fits all. 2. Two-track physical transformation + ideological liquidation in parallel: ordinary prisoners of war repay the war damage with high-intensity and heavy physical labor, and are forced to write criminal materials simultaneously to fix the complete evidence chain of the invasion of China. 3. Decompose and disintegrate the binding of rewards and punishments: Use food, communication, rest, and repatriation priorities as rewards and punishments to disintegrate the resistance of prisoners of war. 4. Closed-loop management and control of technical talents: full physical isolation, dedicated supervision, forced transfer of all technologies, and teaching of our apprentices to eliminate technology loss and safety hazards. 5. Flexible implementation of compliance: There is no explicit requirement to break through the 8-hour basic working hours of the Geneva Convention, achieve the 12-hour transformation goal through "voluntary incremental labor + salary gap", and avoid international diplomatic risks. Part 1 Full-time vertical organizational structure Top level: General Administration of Prisoner of War Control Five core departments work independently and do not overlap with each other: 1. Screening and Interrogation Section: Classification and filing of prisoners of war's identity, military service, skills, and crimes; coordinates the collection and filing of confession materials; 2. Labor Scheduling Section: divides labor intensity, calculates work points for transformation, and allocates labor sites; 3. Professional and Technical Control Section (core special projects): independently managed It manages military doctors, pilots, aviation ground staff, and ordnance technicians; it consists of a medical group and an aviation military industry group; 4. Political Education Section: unified arrangements for ideological education, individual talks, and elimination of militaristic ideas; 5. Warning and Military Law Section: armed guarding of the camp, punishment for violations, and separate detention and trial of felons. Three types of physically isolated independent camps at the grassroots level (inter-camp travel is strictly prohibited) 1. High-intensity rehabilitation camp for ordinary prisoners of war: Accommodating low-level Japanese infantry and ordinary logistics soldiers without professional skills; 2. Closed control camp for core technology: only medical, flight, and military technical personnel are admitted, isolated by high walls, 24 hours a day Special alert; 3. Stubborn punishment camps: Accommodate military police, violent officers, inciting troubles, refusing to plead guilty, and passively reforming prisoners of war; 4. Independent war criminals prison area: Class A and B war felons are held in solitary confinement and do not participate in labor requisition. Part 2 Four-level screening and grading standards for prisoners of war (files must be completed within 24 hours of receipt) Level 1: Ordinary low-level Japanese soldiers (reform core group) No command authority, no special professional skills, ordinary infantry, transport soldiers, cooks and other low-level personnel; Core rules for disposal: high-intensity heavy manual labor reform, forced confession and evidence collection. Level 2: die-hard military and state backbones (officers, military police, intelligence agents) Platoon leaders and above, military police and intelligence personnel, who have long-term promotion of militarism and there is a risk of violence and incitement; Core rules for disposal: implement a full set of high-intensity transformation standards for ordinary soldiers, and additional individual ideological interrogations. Level Three: Scarce Core Technology Prisoners of War (Requisition Protection Group) 1. Medical category: Japanese military doctors, pharmacists, field specialists, and herbal medicine processing personnel; master unique technologies for combat injuries, miasma, frostbite, and epidemic prevention; 2. Aviation and military industry categories: pilots, navigators, aircraft maintenance technicians, ordnance technicians, and airport surveying and mapping personnel; Core rules for disposal: lightweight professional counterpart work, prohibiting heavy physical exertion, and ensuring technical output capabilities. Level 4: War felons Persons involved in major crimes such as city massacres, raids and massacres, in vivo experiments, germ warfare; Disposal rules: not included in the labor requisition system, placed in solitary confinement, only cooperating with criminal interrogations, and awaiting trial in a military court. Part 3 Complete details of graded labor, work and rest, and rations 1. First-level ordinary low-level soldiers, second-level stubborn backbones (high-intensity transformation plan) 1. Time arrangement (a total of 12 hours of transformation tasks per day) 1. 8 Hours of statutory basic compulsory labor: unified allocation of heavy physical work such as debris cleaning, mining, water conservancy construction, road construction, etc., With armed escort throughout the process; 2. 4 Hours of incremental supporting labor (completed by remuneration, not direct violence): camp repair, material handling, wasteland reclamation; - Complete the 12-hour full-day transformation task: sufficient supply of refined grains, vegetables, and regular meat, allowed to send home letters once a month, accumulate high points for reduced sentences, and give priority to repatriation under the same conditions; - Deliberately evading incremental labor and being passive at work: only the minimum life-sustaining coarse grain rations are provided, communications and outdoor activities are cancelled, no work points are accumulated, and the detention period is postponed; 3. Rest system: Complete weekly rest days are cancelled, and only half a day of rest time is provided per week (only laundry and organizing personal belongings); all remaining free time is filled with ideological education and writing crime materials. 2. Gradient of ration standards 1. Complete the transformation tasks in full: sufficient rations to ensure physical fitness for heavy physical work and reduce injuries, injuries and sudden death; 2. Resist incremental transformation and refuse to admit guilt: only the minimum survival rations, no non-staple food, forming a clear punishment gap. 3. Supporting compulsory ideological liquidation and evidence collection (hard requirements, implemented by all staff) 1. Fixed 3 hours of concentrated ideological education every night: display physical evidence of the tragedy of the invasion of China, play records of the victims, and systematically eliminate militaristic brainwashing; 2. Compulsory written confession materials, all are indispensable: ① "Self-Confession of Individual Crimes of Invasion of China": Completely record all actions of participating in the war, participating in raids, looting, and harming the people. Plagiarism and concealment are prohibited; if there is no murder, the atrocities witnessed with one's own eyes must be recorded as circumstantial evidence; ② "Crime Reporting Form for Members of the Team": Expose the facts of violence committed by officers and comrades, corroborate each other, and form a complete chain of trial evidence; 3. Punishment rules: Conceal crimes, fabricate false confessions, refuse to write materials, add incremental labor hours, lower food standards, and conduct one-on-one repeated interrogations until truthful confessions are made; 4. File management: All self-confessions and reporting materials are sealed with unified numbers, one for war criminal trial evidence, and the other for permanent storage in the personal files of prisoners of war. Second- and third-level core technology prisoners of war (lightweight professional requisition plan) 1. Work with professional counterparts for 6-7 hours a day: Medical staff: carry out treatment with military hospitals and state-owned pharmaceutical workshops, mass-produce field medicines, and sort out herbal secret recipes; Aviation and military industry personnel: repair captured fighter aircraft and ordnance, write equipment drawings, and provide theoretical lectures; 2. The remaining free time is only arranged for regular short-term ideological study and technical compilation Technical documentation, no heavy physical labor will be arranged, and no additional labor will be added; 3. Rest system: 1 full day of rest per week; rations shall be of sufficient and high-quality standards to ensure the physical fitness required for precise mental operations; 4. Management and control red line: Our personnel will supervise the entire process on-site, and it is prohibited for more than three people to gather without supervision, and all technical drawings, prescriptions, and operating procedures will be compulsorily collected and archived. Level 3 and 4 war felons No labor assignments. They only cooperate with crime interrogation and confession transcripts every day and are held in solitary confinement. Part 4 Detailed Rules for Closed-Loop Special Control of Technical Talents 1. Physical isolation requirements Technical control camps are completely separated from ordinary reform camps by walls and security, and private contact and message exchange between the two types of prisoners of war are prohibited. 2. Technology compulsory transfer system 1. All personal notes, operation manuals, hand-drawn drawings, and herbal formulas will be collected on the day of receipt; 2. All technological processes will be recorded completely during work, and our apprentices will be forced to teach our apprentices. At least 2 qualified students will be trained for each type of technology; only oral presentations and no written materials will not be counted as meritorious service; 3. All technical data will be archived in a unified state-owned archive, and private retention and secret recipes are prohibited. 3. Classified control and restraint Medical technicians are only allowed to practice medicine under our supervision and are prohibited from contacting civilians alone; those who hide prescriptions and passively treat patients will be directly transferred out of the technical camp and transferred to the stubborn punishment camp. Aviation and military industry personnel Pilots are only allowed to teach theory and dismantle and repair equipment, and are strictly prohibited from contacting complete launchable fighter aircraft. Deliberately destroying parts and teaching false techniques will be severely punished and preferential treatment will be cancelled. 4. Rewards and punishments for technical talents Completely transfer all technologies, bring out qualified apprentices, and cooperate with ideological reform: the accumulated work points will be reduced, and priority will be given to repatriation under the same conditions; those who resist the transfer of technology and secretly collude with remnant bandits: terminate professional recruitment and transfer to high-intensity reform camps. Part 5: Rules for the whole process of prisoners of war differentiation, punishment, and repatriation 1. Graded punishment system 1. Mild violations (slow work, perfunctory writing of confession materials): work points will be deducted, and food standards will be lowered; 2. Moderate violations (private grouping, hiding criminal materials, technicians concealing workmanship): transferred to the stubborn punishment camp for 1-3 months, communication suspended, and preferential rest treatment; 3. Severe violations (inciting riots, destroying evidence of crime, technical prisoners of war passing military intelligence): length of detention extended, and transferred to the Military Justice Section for a harsher trial. 2. Internal differentiation methods 1. Disband the original Japanese divisions and squadrons, mix them in different places, and disintegrate the original dependency relationship between superiors and subordinates; 2. Set up liaison officers among prisoners of war who have performed well, voluntarily confessed, and cooperated with labor, and reported collusion and incitement in a timely manner; 3. Use treatment and repatriation priorities to create internal competition and weaken collective antagonism. 3. Repatriation and Release Standards 1. First-level ordinary low-level soldiers: complete the full 12 hours of reform work, fully submit all confession materials, pass the ideological reform assessment, and arrange for repatriation in batches; those who fail to meet the reform tasks and confession materials will have their detention period postponed; 2. Level 3 core technology Prisoners of war: complete transfer of all skills, training of our apprentices, no violation record, priority for repatriation under the same conditions; incomplete transfer of skills will extend the requisition time; 3. Level 4 war felons: execution of death or long-term imprisonment according to the judgment of the military court, regular repatriation procedures are not applicable. Part 6 Summary of the core advantages of the system 1. The standard distinction is clear: ordinary prisoners of war use high-intensity labor to atone for their sins and fix evidence of crime, and technical talents are professionally recruited with light loads. The two groups of people do not interfere with each other, taking into account both punishment and technology absorption; 2. Avoiding the risks of international law: do not force 12-hour labor in explicit terms, rely on soft constraints of benefits, rewards and punishments, and avoid diplomatic passivity; 3. Implementation of dual transformation: high-intensity physical labor to liquidate the destruction of war Bad, and simultaneously forced written confessions to form a massive amount of evidence of crimes against China to serve in post-war trials; 4. Full-chain closed-loop control: Technical talents form a complete chain of management and control from isolation, data collection, on-site supervision, and apprenticeship inheritance, to eliminate technology loss and safety hazards; 5. Differentiated governance to reduce stability maintenance costs: rely on food, rest, and repatriation gradients to create internal differences and reduce the risk of collective resistance and riots.

Part 9 Safety, Compliance, and Risk Control Industrialization System 1. Standards for the Protection of Cultural Relics and Locations 2. Safety Specifications for Outdoor Mountains, Waters, Alpine, Fire and Flood Prevention 3. Safety Systems for Electric Power, Special Equipment, and Instrument Operations 4. Full Compliance System for Copyright, Portrait, Text, and Music 5. Crew Medical, Insurance, Emergency, and Risk Coverage System Part 10: The Ultimate Boundary Norms of Artistic Beautification and Historical Restoration Chapter 1 The Fundamental Boundary Documentaries seek truth, and film and television dramas seek "beauty in truth, beauty without distortion." Chapter 2 Four Rigid Boundaries 1. Beautification is never the same as fiction 2. Optimization will never break the shape of the times 3. Deduction will never deviate from the style pedigree 4. Popularity will never sacrifice the historical skeleton ✅ Factory 7 exclusive miniature model national division of labor system ✅Model specialization, systematization, refinement, reusable asset library ✅Principle of priority for real scenes in large scenes ✅Complete three-layer shooting structure: real scene + physical construction + miniature model + Optical scene matching ✅Full set of traditional photography auxiliary system (no modern CG time-travel) ✅1950-2000s era lock rules ✅Drama continuity, meticulous workmanship, no mess, no time-travel ✅Popular and balanced based on textual research, people love to watch, and recognized by experts

The reason why many authors start the latest novel with one million contents is that the novel has not improved much, so they will not consider starting the latest novel.

What's going on? The newly ordered chapter disappeared again?

It hasn't been updated yet. Can you please update us old readers first and then update the new book?