Transmigrating to the Three Kingdoms: From Outlaw to Bandit Chief

Li Zhenghong traveled through the Three Kingdoms and served as a good strategist in the ancient county. I visited the thatched cottage three times to invite Zhuge, and Zhao Yun came thousands of miles to get in touch with me. Zhang Song's Fazheng and Gan Xingba are the heroes of Sichuan. Swearing to avenge his father, he entered Yizhou, and Yizhou fell into the hands of Zhenghong. Defeat Zhang Lu and seize Hanzhong, who will dominate the three-point world? Waiting for the battle of burning Chibi and seizing Jingzhou across the Yangtze River. After defeating Cao Cao and Liu Bei, Sun Quan could only give his sister away. The Northern Expedition to the Central Plains defeated Cao Wei, and I was the peak in the Romance of the Three Kingdoms.

A very well-written novel, with a sophisticated conception and strict logic. I think it was supposed to be a popular novel, but now it seems to be only moderately popular. What's the reason for this? After thinking about it carefully, I think maybe the author didn't arrange a golden finger for the protagonist? Although time travel can be regarded as a cheat with a modern vision that transcends the times, isn't time travel standard now? Since it is standard, it cannot attract readers. I know that the author does not want to arrange a cheat to affect the story, but I am thinking about arranging a cheat that will not affect the plot too much. Of course, it is better not to be a system or the like, otherwise it will feel like a game, and the sense of substitution in historical texts will be less. It can be some kind of small superpower. After all, most readers today expect the protagonist to have something different. This is because they are used to reading stories with cheats

Don't miss it if you pass by, the protagonist is recruiting talents and training new people. If you are interested, please sign up downstairs and you will decide on the treatment 🤓

How come you know that Yuan Shao is scheming and Cao Cao is suspicious by nature? This is a comment given by the winner to the loser. Just like King Zhou of Shang was obscene and tyrannical, Qin Shihuang was cruel and cruel, Yang Guang was raped and raped. This is written by the winner. Of course some of it may be true, but most of them must be great talents and strategies. These are all heroes who intend to reform. How can they really be like rubbish? The same is true for Yuan Shao. He has been a hero for a generation and the number one prince in the world, but he knows all his shortcomings.

Status is very important in the Three Kingdoms. How could a bandit with insufficient benevolence, righteousness, and morality have scholars defect to him? Without scholars, there would be no development. After all, the moral sentiments and standards at this time are different from those of later generations. Even if the people follow you, you can't manage them, because stupid people don't have that quality! In addition, the mountain bandit character can only seek refuge with one force in the end, and he may not be welcomed yet!

The protagonist has no cheats, why are you so awesome? After reading so many books, it only makes sense that the protagonist is cheating and rising.

How to say it! A saint who was neither greedy for money nor lustful appeared.

A bandit with no reputation, why would those people defect to you? Especially someone from a noble family, how could they be willing to serve someone with nothing?

Teach the author how to simply make a cannon in ancient times. (Really - just have your hands) 1 The iron pipe used to make the Folan cannon must be a double-layer iron pipe! Because the iron pipes in ancient times were all seamed, only a layer of iron pipes placed around a single iron pipe could ensure that it did not leak. Moreover, the iron pipes could not be equally thick at the front and back, but had to be thin at the front and thick at the back, with the thicker end being the tail. 2. After preparing the iron pipe, make an iron hoop to reinforce the barrel. Take out an iron block and heat it in a forging iron furnace. Then take out the red-hot iron block, beat it into a rectangular shape, and then beat and bend it so that it connects end to end to form an iron ring. The entire Franco machine gun requires many iron hoops. This is the key to ensuring that the Flemish machine gun does not explode, so more hoops are correct. After the iron hoop is made, it cannot be used immediately because the iron hoop is not flat, so special tools need to be used to process its inner circle. 3 After handling the iron hoop, place it on the iron pipe. When performing this step, be sure to heat the iron hoop first, and then place it on the iron pipe. Because the iron hoop expands with heat and contracts with cold, it will be firmly fixed on the iron pipe after it cools down. 4. When attaching an iron ring to the iron pipe, because the tail of the barrel is thicker, the iron hoop cannot reach the tail, so an impact tool must be used to allow the iron hoop to continuously move toward the tail of the barrel. During this process, the iron hoop will gradually tighten to strengthen the barrel. Iron hoops were placed at different parts of the barrel, especially the muzzle, breech and center of the barrel. The two "hoops" on the 5-Flang machine gun are very special. In addition to reinforcing the barrel, they also have different uses. One of the "iron hoops" is used as the gun shaft to adjust the angle of the fire, while the other "iron hoop" is used to prepare for fixing the belly of the gun. The production of the gun shaft is complicated. You need to use a long rectangular iron block to heat, and then "cut" a hole in the middle of the iron block. Then, special tools are used to widen the hole until it can fit over the barrel. Clamp the gun shaft to the middle rear position of the gun barrel. Fixed Gun Shaft 6 After the gun shaft is made, a special "iron hoop" must be made. This iron hoop is very useful because the belly of the gun will be connected to this iron hoop. The production method of this iron hoop is very similar to the production method of the cannon shaft, except that the iron hoop is flat, while the cannon shaft is cylindrical. 7 After the iron hoop is completed, the next step is to process the muzzles at both ends of the barrel. Put one end of the gun barrel into a forging iron furnace and heat it until it is red hot. Then use a hammer to hammer the muzzle into a trumpet shape and hammer it flat to ensure that the iron hoops at both ends cannot fall off. In this way, the barrel of the Folang machine gun is processed, and the barrel of the cannon needs to be made next. 8Select a rectangular iron block and put one end of it into a forging iron furnace for heating. Take the piece of iron from the forge, pound one end of it until it's flat, and punch a hole in the middle. Place one end of the flat iron plate with holes on the special iron hoop made previously, and do the same with the other end. Finally, you will get a quadrilateral belly. Continuously heat and beat the belly of the cannon to make the upper end larger and the lower end smaller (used to hold the sub-cannon). After the belly is adjusted, nails can be wedged between the barrel and the belly to completely fix the belly to the barrel. Finally, nails are wedged into special iron hoops. 9 When the above steps are completed, you can get a Franco machine gun! Now you need to install the obtained Folan cannon on a gun truck or other vehicle. 10 Black gunpowder is made by mixing sulfur powder and charcoal powder (for carbon) and potassium nitrate (for oxygen) according to the stoichiometric ratio of "monosulfide, dinitrate, and charcoal" (mass potassium nitrate 75%, sulfur 10%, charcoal 15%). The optimal ratio should be 74.64% Potassium nitrate, 11.85% Sulfur, and 13.51% Charcoal (mass ratio). Medium-shaped artillery In the early stage, 15 people have one cannon per month. Intermediate experience has shown that 10 people per month can produce one cannon, 15 people per month can produce two cannons during the assembly line period, and after the industrial revolution, 10 people can produce 5 cannons per month. Can attack/defend city and field battle. Fires a big iron bullet/a bunch of small iron bullets. Specifically for infantry phalanx. Without the infantry phalanx on the opposite side, even the light cavalry charge could not be withstood. Flan Cannon Each main gun is equipped with 5 to 9 sub-guns, which can be loaded with ammunition in advance. During combat, the main gun is loaded in turn and fired, which can reach 2-3 rounds per minute. Secondly, it dissipates heat quickly. The Franco machine is a rear-mounted gun, with the barrel connected front and back. The thin wall of the gun enhances the ability of continuous shooting and reduces the risk of spontaneous combustion of gunpowder. Third, it has high safety. The gunpowder capacity of the sub-cannon is constant, which avoids the risk of explosion. Finally, the barrel has a long service life. Since the sub-cannon bears a certain chamber pressure, the life of the barrel is virtually extended. However, the gun barrel cannot withstand continuous fire, and the continuous high-load operation can only wait for more than 10 rounds of artillery to dissipate heat. With low technology, the range can reach about 100-300 meters. With advanced technology, the range can reach about 300-500 meters.

Set up your own business or kneel down and recognize your master? This will affect whether most readers collect and read