The Yellow Turban Marshal of the Three Kingdoms

1. Liu Bei's experience tells us: The president of a group can definitely start by setting up a street stall. 2. Zhuge Liang's experience tells us: Entering a private enterprise actually has more room for development than entering a state-owned enterprise. 3. Lu Bu's experience tells us: Frequent job-hopping will directly lead to the fact that no boss dares to hire you. 4. Pang Tong's experience tells us: being too ugly may affect your application results. 5. Ma Su's experience tells us: No matter how good you are in professional courses, you will basically not need them at work. 6. Yang Xiu's experience tells us: In the workplace, if you always act smarter than your leader, you will die miserably. 7. Gan Ning's experience tells us: Having a bad record will not affect your civil service examination. Heroes don't ask where they came from. 8. Yuan Shao's experience tells us: If the market competes freely, state-owned enterprises may not be able to do better than private enterprises.​

I hope that history will be transformed into a true story, and that I will have my own way. There are too many people writing about the Three Kingdoms now, and there will be fewer people who will read it without new ideas. I hope that the author will not write too clichéd, and do not necessarily have to have intersection with famous people in history.

In the Republic of China, there was a young marshal who was drug addict and prostituted without sending a shot to three provinces. What kind of young marshal was there in the Yellow Turbans? I instinctively felt disgusted by the word marshal.

Zhang Ning on the shore of the land

Brother Jiao has no son. My stand-in brother thanks you for helping him find a son.

Teach the author how to simply make a cannon in ancient times. (Really - just have your hands) 1 The iron pipe used to make the Folan cannon must be a double-layer iron pipe! Because the iron pipes in ancient times were all seamed, only a layer of iron pipes placed around a single iron pipe could ensure that it did not leak. Moreover, the iron pipes could not be equally thick at the front and back, but had to be thin at the front and thick at the back, with the thicker end being the tail. 2. After preparing the iron pipe, make an iron hoop to reinforce the barrel. Take out an iron block and heat it in a forging iron furnace. Then take out the red-hot iron block, beat it into a rectangular shape, and then beat and bend it so that it connects end to end to form an iron ring. The entire Franco machine gun requires many iron hoops. This is the key to ensuring that the Flemish machine gun does not explode, so more hoops are correct. After the iron hoop is made, it cannot be used immediately because the iron hoop is not flat, so special tools need to be used to process its inner circle. 3 After handling the iron hoop, place it on the iron pipe. When performing this step, be sure to heat the iron hoop first, and then place it on the iron pipe. Because the iron hoop expands with heat and contracts with cold, it will be firmly fixed on the iron pipe after it cools down. 4. When attaching an iron ring to the iron pipe, because the tail of the barrel is thicker, the iron hoop cannot reach the tail, so an impact tool must be used to allow the iron hoop to continuously move toward the tail of the barrel. During this process, the iron hoop will gradually tighten to strengthen the barrel. Iron hoops were placed at different parts of the barrel, especially the muzzle, breech and center of the barrel. The two "hoops" on the 5-Flang machine gun are very special. In addition to reinforcing the barrel, they also have different uses. One of the "iron hoops" is used as the gun shaft to adjust the angle of the fire, while the other "iron hoop" is used to prepare for fixing the belly of the gun. The production of the gun shaft is complicated. You need to use a long rectangular iron block to heat, and then "cut" a hole in the middle of the iron block. Then, special tools are used to widen the hole until it can fit over the barrel. Clamp the gun shaft to the middle rear position of the gun barrel. Fixed Gun Shaft 6 After the gun shaft is made, a special "iron hoop" must be made. This iron hoop is very useful because the belly of the gun will be connected to this iron hoop. The production method of this iron hoop is very similar to the production method of the cannon shaft, except that the iron hoop is flat, while the cannon shaft is cylindrical. 7 After the iron hoop is completed, the next step is to process the muzzles at both ends of the barrel. Put one end of the gun barrel into a forging iron furnace and heat it until it is red hot. Then use a hammer to hammer the muzzle into a trumpet shape and hammer it flat to ensure that the iron hoops at both ends cannot fall off. In this way, the barrel of the Folang machine gun is processed, and the barrel of the cannon needs to be made next. 8Select a rectangular iron block and put one end of it into a forging iron furnace for heating. Take the piece of iron from the forge, pound one end of it until it's flat, and punch a hole in the middle. Place one end of the flat iron plate with holes on the special iron hoop made previously, and do the same with the other end. Finally, you will get a quadrilateral belly. Continuously heat and beat the belly of the cannon to make the upper end larger and the lower end smaller (used to hold the sub-cannon). After the belly is adjusted, nails can be wedged between the barrel and the belly to completely fix the belly to the barrel. Finally, nails are wedged into special iron hoops. 9 When the above steps are completed, you can get a Franco machine gun! Now you need to install the obtained Folan cannon on a gun truck or other vehicle. 10 Black gunpowder is made by mixing sulfur powder and charcoal powder (for carbon) and potassium nitrate (for oxygen) according to the stoichiometric ratio of "monosulfide, dinitrate, and charcoal" (mass potassium nitrate 75%, sulfur 10%, charcoal 15%). The optimal ratio should be 74.64% Potassium nitrate, 11.85% Sulfur, and 13.51% Charcoal (mass ratio). Medium-shaped artillery In the early stage, 15 people have one cannon per month. Intermediate experience has shown that 10 people per month can produce one cannon, 15 people per month can produce two cannons during the assembly line period, and after the industrial revolution, 10 people can produce 5 cannons per month. Can attack/defend city and field battle. Fires a big iron bullet/a bunch of small iron bullets. Specifically for infantry phalanx. Without the infantry phalanx on the opposite side, even the light cavalry charge could not be withstood. Flan Cannon Each main gun is equipped with 5 to 9 sub-guns, which can be loaded with ammunition in advance. During combat, the main gun is loaded in turn and fired, which can reach 2-3 rounds per minute. Secondly, it dissipates heat quickly. The Franco machine is a rear-mounted gun, with the barrel connected front and back. The thin wall of the gun enhances the ability of continuous shooting and reduces the risk of spontaneous combustion of gunpowder. Third, it has high safety. The gunpowder capacity of the sub-cannon is constant, which avoids the risk of explosion. Finally, the barrel has a long service life. Since the sub-cannon bears a certain chamber pressure, the life of the barrel is virtually extended. However, the gun barrel cannot withstand continuous fire, and the continuous high-load operation can only wait for more than 10 rounds of artillery to dissipate heat. With low technology, the range can reach about 100-300 meters. With advanced technology, the range can reach about 300-500 meters.

If the Yellow Turban Army wants to strive for hegemony, it needs land reform.

You are really a powerhouse of love 😰 I have to like your spirit

Zhang Jiao has a son who appears out of thin air and wants to be his father

In that era, would there be talented people from aristocratic families who would join thieves?

Is there an outline? Is the protagonist going to take the path of becoming an immortal or becoming an emperor? Or let Taiping Religion become the state religion, and from then on the imperial power and divine ribbon? I don't want to read the last one. If you can't live forever as a national preceptor, how can you be as happy as an emperor? So what if the so-called national fraud no longer lasts for 400 years? A hundred years later, the protagonist's descendants have nothing to do with the protagonist, so why not change the dynasty?

Come on, author, Sister Lily recommends (sacrifice) you, you will definitely become a god once you finish this book🐶

It's a pity that the protagonist is not a stallion. Thinking about it, the protagonist can only marry all the way.

Zhang Ning has always been a saint. If Zhang Jiao has a son, he will also be a saint.

Except for Cao Cao and Sun Ce, I have followed the author's other two books on the Three Kingdoms and have finished them. Nowadays, I prefer the Romance of the Three Kingdoms with cheats and plug-ins. Although Big Explosion Soldier and Magic Tower both had plots that suppressed the protagonist's golden finger, in general, they are still pretty good. I am looking forward to this book.

I feel like it's a bit too open-ended, and I can probably guess the plot later.

Personally, I think that papermaking and printing would at least shake the foundation of aristocratic families' status, and punctuation marks are the biggest killer.

There is too much written about the Three Kingdoms, and it is not as interesting as the other world.

Cao Cao was very loyal to the Han at first, but he was tricked into joining the religion. He was really convinced.

There is a feeling of emptiness in some places.

I just read one chapter and I feel very interested in reading it. Good luck, author.

Where did it come from Cao Cao? To be honest, that one was a bit of a pity.

When is this book going to be finished?

I feel the writing is quite good, why are there so few people?

Later he became a cultivator and shocked the world