
Rebirth Starts in 1993
by The End Of The Moon And The Sun
About This Novel
Li Dongling returned to 1993 and was ready to start a new life. In this life, Li Dongling decided to live his own life and do what he wanted to do. I am Li Dongling, this is my 1993!
What Readers Think
Rating
Community(0)
Official(58)Scraped 2d ago
Don't use the number of nanometers to evaluate a lithography machine! It's just a good idea to learn about the photolithography machine! Which generation is this lithography machine in the book that can produce 365 nanometers? First generation? Or the second generation? The first-generation lithography machine, g-line, has a light source wavelength of 438 nanometers, a proximity type, and can theoretically produce 800 to 250 nanometers. The second-generation lithography machine i-line has a light source wavelength of 365 nanometers, a proximity type, and can theoretically produce 800 to 250 nanometers. The third-generation lithography machine KrF has a light source wavelength of 248 nanometers, a scanning projection type, and can theoretically produce 180 to 130 nanometers. The fourth-generation lithography machine ArF has a light source wavelength of 193 nanometers (deep ultraviolet lithography, also called DUV), step projection type, and immersion step type (commonly known as immersion lithography machine, which can be overprinted). The theory is that it can produce 130-65 nanometers without overlaying, and 45-7 nanometers can be produced with overlaying. The fifth-generation lithography machine EUV, the light source wavelength is 13.5 Nanometers, extreme ultraviolet type, and can theoretically produce 7 to 3 nanometers. For example, take a look at the 2024 Ministry of Industry and Information Technology Equipment Promotion Catalog. Argon fluoride lithography machine resolution (≤65nm) and overlay accuracy (≤8nm) are two independent indicators. The former is determined by the wavelength of the light source (193nm) and the optical system, and the latter reflects the multi-layer alignment capability. Compared with similar ASML equipment (such as 1460K ArF lithography machine), the domestic equipment has the same resolution, but the overlay accuracy is slightly lower (ASML is 3.5/5.0Nm). The current parameters have met the mass production needs of 45-65nm logic chips and memory chips. After improvement through immersion technology, the resolution can be increased to the 7nm process node.
Give it four stars and wait and see.
It depends on whether the author chooses a single female protagonist or multiple female protagonists after the update. I personally like single female protagonists with straightforward relationships.
See chapters 898 and 899. Author, this is not what you calculated! Wu Geying's company only accounts for 15% of its US$400 million. There will be wild rumors at home and abroad that the country is about to kill pigs! Even if Beidou 3 invests 10 billion US dollars, does it have anything to do with you? Will the state invest 10 billion in the future without diluting your 15% stake? Is there such a loss of state-owned assets? This 15% should not be said like this, but should be said like this: "You can invest up to 400 million U. S. Dollars, accounting for no less than 15% of the shares." In other words, the amount of the share is related to the assets invested by the state and other investors. The state must account for 51%. If US$400 million accounts for 15%, the state must match the corresponding assets in equal amounts, which is US$1.36 Billion! Otherwise, the pig-killing plate will really go viral! There is also a situation where it is obvious that the money cannot be repaid in the short and medium term, so the pig's feet must be given help in other aspects, such as aerospace qualifications, rocket and aircraft engine technology, etc.!
The author, Internet companies suggested spinning off Donglin Hi-tech, and also suggested that Tanglin Hi-tech should focus on communication technology (including base stations), engineering chips, and engineering software, and set up another company to focus on terminal equipment (Xingchen, Honor or others). Establish Tanglin Holdings and other companies (including offshore companies) to pick out the pig's feet on the bright side. Donglin Electronics (or Microelectronics) was established to be responsible for the R&D and manufacturing of equipment related to chip manufacturing. Donglin Materials and Donglin Chemical were established to be responsible for the R&D and manufacturing of materials related to the chip, storage, liquid crystal, photovoltaic and other industries, such as photoresist, silicon wafers, graphene, carbon fiber, etc.
It's finally on the shelves, please support it and come on!
The author established a club of his own, such as Chang'an Club or Yanhuang Club or others, and invited industrial entrepreneurs and emerging technology entrepreneurs, including entrepreneurs and scientists from the Internet, software (including engineering software, management software), electronic semiconductor communications, automobiles, machine tools, materials, etc. Such as Ren Lao, Boatman Brother, Shu Fu Brother, Cao Dewang, Wang Dongsheng, Academician Ni, Zhang Rujing, Guan Tongxian of Zhenhua Heavy Industry, Hu Weiwu, the father of Loongson, etc. Founders and executives of leading manufacturing companies, high-tech companies, leading Internet software companies, as well as relevant scientists, etc., Were all invited.
I have been following several books at the same time. Only this one really made me want to put it down. The writing is not very good, but the progression of the story makes me want to put it down. It not only increases my knowledge, but also gives me a refreshing feeling of bringing myself to promote our country's prestige. I also caught up with the last Bruno Song and it's so cool.
Author, there are too many places that need to use chips. Don't just mention CPUs and GPUs when talking about chips. Even though there are many other chips in mobile phones and computers, there are also many, many places that need to use chips in cameras, TV series, refrigerators, air conditioners, cars, etc. We need to develop at the same time, make profits through other chips, and then supplement the research and development of CPU, GPU, baseband, etc. There is also the acquisition of a part of Shenzhen Lenovo's shares in Hong Kong (divided into different shell companies) to prevent Liu from completely controlling Lenovo, which is disgusting to him.
A book you can keep reading
Rating
Community(0)
Official(58)Scraped 2d ago
Don't use the number of nanometers to evaluate a lithography machine! It's just a good idea to learn about the photolithography machine! Which generation is this lithography machine in the book that can produce 365 nanometers? First generation? Or the second generation? The first-generation lithography machine, g-line, has a light source wavelength of 438 nanometers, a proximity type, and can theoretically produce 800 to 250 nanometers. The second-generation lithography machine i-line has a light source wavelength of 365 nanometers, a proximity type, and can theoretically produce 800 to 250 nanometers. The third-generation lithography machine KrF has a light source wavelength of 248 nanometers, a scanning projection type, and can theoretically produce 180 to 130 nanometers. The fourth-generation lithography machine ArF has a light source wavelength of 193 nanometers (deep ultraviolet lithography, also called DUV), step projection type, and immersion step type (commonly known as immersion lithography machine, which can be overprinted). The theory is that it can produce 130-65 nanometers without overlaying, and 45-7 nanometers can be produced with overlaying. The fifth-generation lithography machine EUV, the light source wavelength is 13.5 Nanometers, extreme ultraviolet type, and can theoretically produce 7 to 3 nanometers. For example, take a look at the 2024 Ministry of Industry and Information Technology Equipment Promotion Catalog. Argon fluoride lithography machine resolution (≤65nm) and overlay accuracy (≤8nm) are two independent indicators. The former is determined by the wavelength of the light source (193nm) and the optical system, and the latter reflects the multi-layer alignment capability. Compared with similar ASML equipment (such as 1460K ArF lithography machine), the domestic equipment has the same resolution, but the overlay accuracy is slightly lower (ASML is 3.5/5.0Nm). The current parameters have met the mass production needs of 45-65nm logic chips and memory chips. After improvement through immersion technology, the resolution can be increased to the 7nm process node.
Give it four stars and wait and see.
It depends on whether the author chooses a single female protagonist or multiple female protagonists after the update. I personally like single female protagonists with straightforward relationships.
See chapters 898 and 899. Author, this is not what you calculated! Wu Geying's company only accounts for 15% of its US$400 million. There will be wild rumors at home and abroad that the country is about to kill pigs! Even if Beidou 3 invests 10 billion US dollars, does it have anything to do with you? Will the state invest 10 billion in the future without diluting your 15% stake? Is there such a loss of state-owned assets? This 15% should not be said like this, but should be said like this: "You can invest up to 400 million U. S. Dollars, accounting for no less than 15% of the shares." In other words, the amount of the share is related to the assets invested by the state and other investors. The state must account for 51%. If US$400 million accounts for 15%, the state must match the corresponding assets in equal amounts, which is US$1.36 Billion! Otherwise, the pig-killing plate will really go viral! There is also a situation where it is obvious that the money cannot be repaid in the short and medium term, so the pig's feet must be given help in other aspects, such as aerospace qualifications, rocket and aircraft engine technology, etc.!
The author, Internet companies suggested spinning off Donglin Hi-tech, and also suggested that Tanglin Hi-tech should focus on communication technology (including base stations), engineering chips, and engineering software, and set up another company to focus on terminal equipment (Xingchen, Honor or others). Establish Tanglin Holdings and other companies (including offshore companies) to pick out the pig's feet on the bright side. Donglin Electronics (or Microelectronics) was established to be responsible for the R&D and manufacturing of equipment related to chip manufacturing. Donglin Materials and Donglin Chemical were established to be responsible for the R&D and manufacturing of materials related to the chip, storage, liquid crystal, photovoltaic and other industries, such as photoresist, silicon wafers, graphene, carbon fiber, etc.
It's finally on the shelves, please support it and come on!
The author established a club of his own, such as Chang'an Club or Yanhuang Club or others, and invited industrial entrepreneurs and emerging technology entrepreneurs, including entrepreneurs and scientists from the Internet, software (including engineering software, management software), electronic semiconductor communications, automobiles, machine tools, materials, etc. Such as Ren Lao, Boatman Brother, Shu Fu Brother, Cao Dewang, Wang Dongsheng, Academician Ni, Zhang Rujing, Guan Tongxian of Zhenhua Heavy Industry, Hu Weiwu, the father of Loongson, etc. Founders and executives of leading manufacturing companies, high-tech companies, leading Internet software companies, as well as relevant scientists, etc., Were all invited.
I have been following several books at the same time. Only this one really made me want to put it down. The writing is not very good, but the progression of the story makes me want to put it down. It not only increases my knowledge, but also gives me a refreshing feeling of bringing myself to promote our country's prestige. I also caught up with the last Bruno Song and it's so cool.
Author, there are too many places that need to use chips. Don't just mention CPUs and GPUs when talking about chips. Even though there are many other chips in mobile phones and computers, there are also many, many places that need to use chips in cameras, TV series, refrigerators, air conditioners, cars, etc. We need to develop at the same time, make profits through other chips, and then supplement the research and development of CPU, GPU, baseband, etc. There is also the acquisition of a part of Shenzhen Lenovo's shares in Hong Kong (divided into different shell companies) to prevent Liu from completely controlling Lenovo, which is disgusting to him.
A book you can keep reading
Featured in 11 Booklists
Official(11)
Rebirth in 1993, factory workers. There are not many articles about entrepreneurship written in 1993. Young readers are more familiar with the Internet era after 1998 and the mobile Internet era 10 years later. In fact, there was also a lot of enthusiasm around 1993. This was an era when reckless heroes stirred up troubles. Business heroes from all walks of life grew up wildly and grew stronger in the chaos. The first pot of gold was selling satellite pots. The male protagonist was sent from the factory and came to a factory that was about to close down. When the factory director was in dire straits, the male protagonist cooperated with the factory using satellite pot manufacturing technology and shared part of the profits. He soon became a million-dollar household and obtained initial capital. Second item, digital cordless phone and wheel mouse... Some readers may have an impression of this author. He is an old entrepreneurial writer. He has written two entrepreneurial articles, and he still has some skills. It is worth looking forward to. One of his strengths is that he doesn't write successful male protagonists as diaosi. He has the courage of a business tycoon and does not downgrade his character. This is good. Many male protagonists in entrepreneurial stories have become the richest man in the country, but they give people the same feeling as if they have just graduated and entered the society. Reading it gave me a headache. But he also has many flaws. The biggest problem is that it is easy to write the male protagonist as an all-round entrepreneur, spanning various fields, establishing multiple groups, doing everything, and succeeding in everything. This development route seems very exciting, but due to the author's writing skills, the final novel feels too much but not refined, and it is messy and disorganized. This was the case in the last book. The male protagonist was successful in everything he did. He quickly became a leader as soon as he entered a certain industry. The shocking merger and acquisition case was not interesting to write about. It was as bland as shopping for groceries. I didn't want to read it after I got to the end. I hope the author can improve this problem in this book and just specialize in one or two or three fields instead of spanning more than a dozen industries. What's more, the setting of this book is in China. It's not like the rich people have the final say in foreign countries like the previous book. If you really build a monopoly giant across multiple fields, just wait for retirement. The emotional drama is extremely toxic. His girlfriend in his previous life was very kind to him, but the male protagonist himself is ignorant, his self-esteem is broken, and he feels that his girlfriend is sorry for him. If you want to open a harem, just open it. Don't talk about how his previous girlfriend was sorry for him. Anyone with a normal outlook can see who is right and who is wrong. The male protagonist is written as if he is a fairy and resents his wife. It is disgusting to watch. Also, once a seemingly crucial role appears to be a woman, don't you understand, the author, what the point of an entrepreneurial article is? Business war plot. In terms of emotional scenes, in fact, as long as the male protagonist is not impotent, it will be fine. If he can't write well, don't write too much. Use your strengths and avoid weaknesses, and don't work on your weaknesses. If you don't know how to write emotional scenes, don't write them.




Tu Shiwen's new book... Well written, keep up... Life is beautiful for some people. These people strive for a certain goal throughout their lives. The belief in success acts like an alarm clock in the human brain, waking you up when you need it.




Cool article, looks pretty good, the basic logic is online The protagonist Li Donglin makes consumer electronics products in the country, mainly selling them abroad. The current products... The first satellite🛰️Pot, an ancient product😂; The second one is the pet machine, which should be regarded as the predecessor of Pokemon, the small game machine, the black and white one; The third product is a cordless phone. Can it be regarded as the predecessor of PHS? Currently, it is making rapid progress in Europe, competing with Siemens, and is selling telephones and pet machines in bundles. It has also hired Ronaldo as an endorser, which is great. Current progress: Chapter ninety-seven (10,000 words)




📚Recommendation for "Rebirth Begins in 1993" Book title: "Rebirth Begins in 1993" Author: Yueyang Zhiya Tags: city, business war, rebirth, Internet, making money If you have ever fantasized about returning to that golden age full of opportunities with future memories, this book will definitely satisfy you. The protagonist Li Dongling starts over from 1993 with an accurate prediction of the times. There is no cheating routine, but a step-by-step approach to the pulse of the times: from the early business trends, to the rise of the Internet wave, to the undercurrent of capital gaming, every step is solid and precise. With a super-long length of 5.02 Million words and 6,000 stable updates per day, it allows you to immerse yourself in how an ordinary person transformed "My fate is up to me" from a slogan into a magnificent life epic in the current of times. This is not only a story about rebirth, but also a business chronicle that condenses China's economic development in the past thirty years. See how Li Dongling grew from an ordinary young man to a business giant that stirred up the storm amid policy trends, industry reshuffles, and capital games. Recommended crowd: - Readers who like business war, rebirth, and urban themes - Friends who are interested in the changes of the times from the 1990s to the early 21st century - Bookworms who pursue long series and stable updates
















